Log In

Tekno’s New SCT410.3 Looks Killer

Tekno’s New SCT410.3 Looks Killer

“The SCT410.3 leapfrogs over the 4×4 SC competition in terms of performance, durability, and value,” says Tekno. Sounds good to us! Tekno already had a hot 4X4 with the previous-gen truck, and the new point-three looks like an even more serious short-course track weapon. It’s due in April, look for a review in RCCA.

See the bullets after the pics for details, and for ALL the info and specs, check out the SCT410.3 in our Hot News & New Stuff forum

Tekno SCT410.3 2

Looks tough, right? You can’t tell by looking at the fully assembled truck, but the 4mm chassis is CNC’d for lightness.

 

Tekno SCT410.3 3

Front and rear suspension geometry is new, and the V2 hingepin brace system increases adjustability. New longer rear arms are paired with reduced-offset rear hubs.

 

Tekno SCT410.3 4

The big-bore shocks incorporate bleed screws into the caps and attach well outboard on the arms.

 

Tekno SCT410.3 5

Everything is robustly built, Tekno-style.

 

Tekno SCT410.3 6

Note the flat-bottom arms with droop screws.

 

Tekno SCT410.3

It’s almost a shame to cover it up with a body…

 

From Tekno RC:

SCT410.3 New Features and Improvements:

Drivetrain Improvements:

  • The diffs feature smoother gears and a new 1-piece composite diff cross pin.
  • The old steel driveshaft has been replaced with a new tapered aluminum design.
  • All of the outdrives and couplers are now lightened.
  • Angled rear gearbox with larger bearings is now standard.
  • Results – dramatically reduced rotating mass, improved acceleration and efficiency.

Suspension Improvements:

  • All new front and rear suspension geometry.
  • New reduced height front and rear shock towers.
  • New V2 hinge pin brace system for incredible adjustability.
  • New front arms feature a flat bottom for increased durability and clearance.
  • New rear arms feature the flat bottom but are also 4mm longer.
  • New rear hubs with reduced offset to match the longer rear arms.
  • New longer rear sway bar.
  • New clamping spring perches with captured shock boots.
  • New droop adjustment screws are now standard.
  • Results – lower CG, increased adjustability, increased stability, and increased consistency.

Weight, Durability, and other Improvements:

  • Lightened black anodized 4mm CNC chassis is now standard.
  • Aluminum pivot balls throughout.
  • Aluminum suspension and spindle bushings are now standard.
  • New lighter camber link rod ends and turnbuckles.
  • LCG Lightened Motor mount is now standard.
  • M5 stub axles are now standard.
  • Split center diff mount makes maintenance a breeze.
  • Lightened metal clamping 12mm wheel hexes are now standard.
  • Revised front bumper increases ground clearance.
  • Larger 6x13x5mm (vs. 6x12x4mm) outer wheel bearings front and rear increases durability.
  • Spindles feature adjustable stops for more precise steering control.
  • Compatibility with existing parts and options.
  • Results – lower CG, improved handling, improved acceleration, and improved durability.

 TKR5507 – $399.99

Available: April 2015

 

Updated: March 23, 2015 — 4:07 PM

2 Comments

Add a Comment
  1. will it be RTR or kit?

    1. Tekno only makes kits 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *

RC Car Action © 2016
WordPress Video Lightbox
click me