Basher Announces New 1/8 Scale BSR Rally

Nov 03, 2014 1 Comment by

Basher made a name for itself with the Nitro Circus monster and short course truck models (which we reviewed in the May 2014 and September 2014 issues, respectively), and has now added a rally car to the low buck, high-performance family. The BSR Rally is built like a 1/8 scale buggy, and well-equipped with 17mm shocks, 2100KV motor, and 4S-rated 120a speed control. Batteries are up to you, everything else is included with this fully RTR model. Price varies depending on your country, but US buyers are looking at just under $320.

Official deets after the pics.

basher_cc

 

The BSR Rally has a nicely proportioned body and we like the 12-spoke hoops. If it’s like the Nitro Circus trucks, decaling will be left to you.

 

9424000001 (6)

 

Hook-and-loop straps hold the battery of your choice, up to 4S LiPo. The single connector on the speed control means you’ll need a series Y-harness if you want to run a pair of 2S LiPo packs.

 

9424000001 (7)

 

Looking good back here, with included sway bars and diffuser styling on the rear bumper. The aluminum shocks have 17mm bores.

9424000001 (10)

The small transmitter is functional but likely to be upgraded quickly by many buyers.

 

9424000001 (8)

9424000001 (9)

 

9424000001 (11)

From Basher:

New from Basher, the ready-to run BSR Rally 1/8 Scale rally car! 

Built on a rugged buggy platform with refinements to handle the rigors of on AND off road driving, the BSR Rally is a beast of a vehicle!

The BSR Rally 1/8 Scale rally car features a monster 4-cell capable brushless power system and puts all that power down through an all steel 4WD drive transmission. With big bore alloy shocks and heavy duty components, this car can launch off almost anything and just keep on goin’. The chassis features all the same adjustability you would expect from a full race vehicle including camber, toe, and shock position so you can tune your BSR Rally for every surface condition. 

The attention to detail on this car is extraordinary. The engineers and designers at Basher underwent an extensive testing and development process to ensure no shortcuts were taken. Team Basher understands the importance of after sales support and offer a full range of spares for your battle scarred car along with an awesome range of hop-up parts to upgrade your ride.

Features:

  • Powered by two 7.4V 2S Lipoly battery
  • 4 wheel drive with front/mid/rear steel diff.
  • Adjustable Toe, Camber and shock position
  • Pre-glued DMACK On-road Rally Tires
  • 3mm Aluminum chassis
  • Powerful 2100KV brushless motor with a stable 120A ESC support.
  • Tie rod and camber link are made by steel, increase the reliability.
  • 17mm Aluminum Big Bore Shock

Specs:

Width: 305mm
Height: 200mm
Length: 530mm
Wheelbase: 327mm
Ground clearance: 17mm
Motor: 2100KV, 40mm Brushless
ESC: 120A waterproof
Servo: Water resistant metal gear
Drive: Shaft Drive full time 4WD
Battery compartment: 137mm x 47mm (7.4V Lipoly Hardcase Battery)

Required:

  • 2 x 30C 2S 7.4V 5000mAh Hardcase Lipoly Batteries
  • 4 x AAA Batteries (For Transmitter)

9424000001 – $318.71 

 

 

Electric, Featured News, Off-road, On-road, Product News

About the author

I've been involved in RC for over 25 years, and first joined Air Age Media in 1997. I served as Executive Editor until 2008, when I went to work on the manufacturing side of the RC biz. Now back at RC Car Action, I'm thrilled to be doing what I love most--not just enjoying RC, but sharing it with all of you. In addition to RC, I enjoy spending time with my beautiful wife Kathleen and our wonderful daughter Audrey.

One Response to “Basher Announces New 1/8 Scale BSR Rally”

  1. Ralph Rutigliano says:

    What has happend to this hobby? Why is it that in order for you to buy a KIT, you have to purchase a race quality vehicle. Building the vehicle is a big part of the hobby. Why have manufactures gotten away from this? In my opinion it is NO LONGER considered a hobby when you are able to just take the vehicle out of the box and start using it. Where is the fun in that? Not to mention the feeling of acomplishment when you’ve just completed your build. I do own several race quality vehicles, but I’ve been looking for a vehicle like this 1/8 scale rally car to BUILD at my lesure, but other than Tamiya’s rally car everything else is ready to run. (BOOOO)…I’m 40 years old and I’ve spent a ton of money in this hobby and I feel like the manufactures have forgotten about the purist, the people/customers who really enjoy and take the time and follow a manual to it’s completion.

Copyright © 2014 Air Age Media. All rights reserved.