MIP Pucks Shiny Drive System Now Available for SC10 and T4 Series

MIP Pucks Shiny Drive System Now Available for SC10 and T4 Series

MIP invented the original and much-copied CVD design, which has equipped the cars and trucks of  countless national and world champions. MIP’s most recent addition to the CVD design is their “Pucks” concept, which addresses the wear inherent in the dogbone/drive cup interface. Instead of steel-on-steel contact with a bare crosspin riding in the outdrive’s slot, the crosspin is padded by plastic “Pucks.” The Pucks reduce friction and prevent outdrive wear, and are easily replaced to maintain factory-new tolerances and performance. Pretty sweet. MIP offers the Pucks system with a wide variety of its CVD kits. The latest is pictured here, developed specifically for Team Associated SC10, SC10.2, and T4.2 models. Since the Pucks require a wider drive slot than a bare crosspin, the kit includes a complete ball differential with the required wide-slot outdrives.

Official MIP hype after the pics.

MIP_Pucks

Puck_detail

 

MIP would like to introduce the drive system of the future, for all Mod 2wd vehicles; MOD #14215 MIP ‘SHINY’ PUCKS™ SYSTEMS!!!! These systems are of steel construction, keeping to relatively the same overall weight that you are used to with your steel OEM drivetrain; but giving you the added benefit of MIP Pucks™ that are fully serviceable. No longer will diff outdrives and CV bones wear simultaneously, with the puck system all that is needed is to easily change Pucks™ when necessary, and the drivetrain stays tighter, fresh, longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive. 

TARGET CUSTOMERS:

  • Serious racers looking for a competitive advantage on the track
  • Racers with 13.5 or higher motors

COMPETITIVE ADVANTAGES:

  • Quicker acceleration
  • Less overall wear on drive components

FEATURES:

  • Replaceable Pucks to keep drivetrain fresh
  • Race Prove C-CVD™ Construction
  • Two sets of holes in the C-CVD™ bell
  • 100% Quality made in the USA!

INCLUDES:

MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), MIP Instruction Sheet (1), Diff Lube & Grease Cup (1), 3/32” Chrome Steel Ball Bearing (12), 1/16” Chrome Steel Ball Bearing (7), MIP Modified Diff Ring (2), ¼” x 9/32” Diff Spring (1), 2-56 x .925 Shoulder Diff Screw (1),#2 Hardened Washer (1), MIP Thrust Retainer (1), MIP T-Nut (1), MIP Thrust Diff Cover (1), Diff Gear 52 T 48P (1), 5/32 x 5/16 x .125 Bearing (2), MIP Pucks™ Male Outdrive (1), MIP Pucks™ Female Outdrive (1), 4-40 X 3/32” SHSS Cup Point (2), 1/16” x .430” Solid Pin (2), 8-32 Steel Locknut (2), 1-72 x 1/8” Button Head (6), MIP 3/16” CVD™ Coupling (2), 1/16” x 3/8” Roll Pin (2), MIP Lube & Thread Gel Cup (1), MIP Retaining Ring (2), MIP CVD™ Puck Pin (2), MIP Outdrive Pucks™ (8), MIP CVD™ Axle (2), 3/16″ x .010″ Steel Washer (4), MIP Pucks™ Shiny C-CVD™ Bone (2) 

REQUIRES:

.050 Allen Key – (Suggest – #9000 MIP Hex Driver Wrench .050 inch)
5/64 Allen Key- (Suggest – #9002 MIP Hex Driver Wrench 5/64” inch)

COMPATIBILITY:

AE SC10, SC10.2, RC10 T4.2 Trucks

#14215 – MSRP: $95.00 

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 3:34 PM
Air Age Media ©