Turning Heads! Easy driver-figure animation

Turning Heads! Easy driver-figure animation

Kyosho’s Rage VE features a molded-in driver figure with a separate helmet that’s ripe for head-turning action. All it takes is a spare servo and a little mechanical creativity.

Turning_Heads

In the case of the Rage, the headrest proved to be perfectly sized for a micro servo, and a collection of hardware and linkages from the spare parts bin took care of the rest. For this installation, the linkage is on the right side of the head pivot and the left side of the servo’s output shaft so the driver “looks” in the proper direction relative to the front wheels. Note the shock piston used as a spacer–whatever works!

 

Turning_Heads_2_arrow

A Y-harness allows the “head servo” and steering servo to be plugged into the same channel. If you have a receiver with dual channel-1 inputs, you can skip the Y-harness. When the steering wheel is turned, the driver turns his head too.

Here’s a quick video that shows the finished project:

 

And you old timers may recall this guy…

https://www.youtube.com/watch?v=hZ6YUMG7Yjs

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 20, 2015 — 4:17 PM
Air Age Media ©