Test Bench: JConcepts Escape Body For Associated SC10B

May 08, 2013 No Comments by

In the past, the only replacement body choice for Team Associated’s RTR SC10B was the factory-issued shell, but JConcepts now lets you give your cage-car a new look with their Escape body which is custom fit for the SC10B.

Unpainted Escape

The Escape body is molded in two pieces, each with protective overspray film.  The main body and rear fender skirts are molded together, and the driver’s cockpit is a separate component.  The body features a reversed hood scoop to provide more air relief, a tighter fitting design to eliminate “gaps” between the body and chassis, side ducts, and raised number plates that fit behind the roll cage.  The cockpit features a molded steering wheel, gear shift, driver’s suit, and seatbelts.

IMG_9225

I shipped the Escape body to Zegers RC Graffixx (http://www.zegersrcgraffixx.net) for a pro paint job.  The parts arrived a few days later and the paint really brought out the body’s styling and detail, especially in the driver’s cockpit.

IMG_9233

IMG_9235

I trimmed the body along the provided cut lines and reamed all the mounting holes.  First I removed the rear fender skirts, then trimmed out the inside of the body where it fits around the SC10B’s roll cage. Then I lined up the holes for the external nerf bars. Clear indicators show where to trim, ream, etc. during the entire assembly process. The parts needed for the nerf bars and roll cage are reused from the SC10B, or you can purchase the Associated parts separately.

IMG_9242

IMG_9247

IMG_9251

IMG_9253

To complete the body, I trimmed the driver’s cockpit, installed the driver’s head, and mounted it to the underside of the main body. The Escape does not include the drivers head. You can re-use the one supplied with your SC10B, or if you prefer to install a fresh driver’s head, order Associated part number ASC91217.

IMAG0214

All that was left now were the decals. I applied the included JConcepts stickers, as well as a fresh set of Associated SC10B decals. For the finishing touch, I added S1 Pro Name and S1 Pro Factory decals courtesy of Stickit1Racing (http://www.s1racing.net).

IMG_9314

I ran the Escape body at Round 3 of the Short Course Showdown Nationwide Tour, and it looked sharp and performed well.  Unlike a short course truck body, I didn’t have to add any vent holes or other modifications to improve performance when traveling through the air.  The body was a nice, snug fit around the chassis, and that combined with the tapered sides helped to reduce drag.  The raised number plates added a nice touch to the overall look, and despite my many crashes the lexan held up with any cracking.

So in conclusion, the Escape body is an excellent alternative to SC10B’s stock body and it definitely stands out from the rest of the pack.

Featured Items

0257 – JConcepts Escape SC10B Buggy Body With Driver

ASC91219 – Team Associated SC10B Team AE Body Decal Set

ASC91217 – Team Associated SC10B Cockpit Underbody With Helmet

Gallery > Online Review Of JConcepts’ Escape Body For The SC10B

Tags:

For more articles featuring JConcepts, click here

.

Featured News, Online Exclusives, Short Course

About the author

Bringing you RC product news you can use on a daily basis as Car Action's Online News Editor. I have over 15 years of RC experience, plus a background in print and broadcast journalism, engineering, information technology, direct marketing, and even banking. Currently I enjoy racing 1/10 electric off-road, and have been bitten by the short course bug.
No Responses to “Test Bench: JConcepts Escape Body For Associated SC10B”
Copyright © 2014 Air Age Media. All rights reserved.