RPM Front And Rear Bulkheads For The Traxxas T-Maxx And E-Maxx

RPM Front And Rear Bulkheads For The Traxxas T-Maxx And E-Maxx

These new bulkheads feature an unique design that incorporates locknuts to prevent screws from backing out which will dramatically lower the chance of damaging your bulkhead. Check out the press release below for more information:

Until now, the Traxxas T-Maxx and E-Maxx line of trucks has been missing a key link in the chain of RPM durability – the bulkheads. We’ve heard numerous complaints over the years requesting RPM bulkheads for these beasts and, with some creative engineering, we’ve found a way to solve common bulkhead breakage issues.

Each RPM bulkhead starts with the RPM trademark blend of incredibly strong nylons. From there, we redesigned key areas to improve impact resistance but the most significant change comes in the form of lock nuts. After extensive testing and review of damaged stock bulkheads, we found that the most common reason stock bulkheads break is from the mounting screws backing out. Our solution was to incorporate a series of lock nuts at the chassis and skid plate mounting holes to securely lock the bulkheads in place. Once the bulkhead is secure, our materials and design changes take over for the strongest, lightest and most durable set of aftermarket bulkheads currently available! RPM front bulkheads are so light, that they weigh less than the stock parts they replace.

RPM bulkheads are sold in pairs, molded in either black or blue and backed by our industry-leading limited lifetime breakage warranty. Protect your ride with a set of RPM bulkheads today!

Tech Notes:

RPM T-Maxx & E-Maxx bulkheads are stock replacement parts and fit all versions of these trucks, from the original T-Maxx 1.5 to the most modern versions of the 3.3 T-Maxx and Brushless edition E-Maxx

#81062 Front Bulkheads for the T-Maxx & E-Maxx – Black $15.95 / pair
#81065 Front Bulkheads for the T-Maxx & E-Maxx – Blue $15.95 / pair

81075Rear Bulkheads For The T-Maxx And E-Maxx

RPM Rear Bulkheads for the T-Maxx & E-Maxx bulkheads, combined with our front bulkheads (RPM #81062 or #81065) are available to further improve the durability of these awesome monster trucks! Each RPM rear bulkhead follows the same design criteria we used to build our front bulkheads – superior materials, impact resistant design changes and lock-nuts to help prevent critical screws from backing out. All this in a part that weighs exactly the same as the stock rear bulkheads!

Please see our front bulkheads (RPM #81062 & #81065) for additional details.

RPM bulkheads are stock replacement parts. Each set of bulkheads is sold in pairs and molded in either black or blue and backed by our world-renowned limited lifetime breakage warranty. RPM molded products are proudly designed and manufactured right here in the USA!

Tech Notes:

RPM T-Maxx & E-Maxx bulkheads are stock replacement parts and fit all versions of these trucks, from the original T-Maxx 1.5 to the most modern versions of the 3.3 T-Maxx and Brushless edition E-Maxx.

#81072 Rear Bulkheads for the T-Maxx & E-Maxx – Black $15.95 / pair
#81075 Rear Bulkheads for the T-Maxx & E-Maxx – Blue $15.95 / pair

[nggallery id=1245]

If you like this article, check out this additional article on RPM.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 3:53 PM
Air Age Media ©