Pro-Line’s New Releases for March 2013

Pro-Line’s New Releases for March 2013

Pro-Line Racing is constantly churning out new products for RC’ers of every kind, from hardcore racers to backyard bashers. Here’s their latest batch of new products that they released this month – leave us a comment below and tell us which are your favorites!

Pre-Painted Flo-Tek Bodies for Short Course Trucks

#3355-13 – Flo-Tek (Green/MotoX Scheme)
#3366-13 – Flo-Tek Ford F-150 Raptor SVT Body (Blue/Stealth Scheme)

pre-painted short course bodies

This is a Painted and Partially Trimmed/Stickered Short Course Body. Pro-Line is pushing the limit of body development by providing a pre-Painted and Partially Trimmed/Stickered Short Course body to get you to the track faster than ever before! This is not some silk-screened China made knock-off body with blacked-out windows… This is a Pro-Line made body with clear windows that has been hand painted by the Pros! The first Pro-Line bodies to receive this treatment are the Flo-Tek body and the Flo-Tek Ford F-150 Raptor SVT body: Introducing the first SC body specifically designed to minimize the short-course body parachute effect! If you have ever raced or bashed a short-course truck, you know that SC bodies act like parachutes when going over jumps, causing you to lose control and crash. Pro-Line’s new Flo-Tek SC body features futuristic styling coupled with large vent holes that allow air to flow through eliminating aerodynamic drag. The locations and size of the vents were designed to maximize air flow through the body while keeping the aggressive and high-tech look. Don’t get caught in the wind while the competition passes you by – Get Pro-Line’s new Flo-Tek SC body today!


F-11 3.8″ (Traxxas® Style Bead) Black 1/2″ Offset 17mm Wheels for 17mm MT Front or Rear

#2742-03

F-11 half inch offset wheels

This is a pair of F-11 3.8” (Traxxas® Style Bead) Black ½” Offset 17mm Wheels. Pro-Line has an all-new wheel for all of the Monster Truck fans: the F-11 3.8” ½” Offset 17mm wheel! The F-11 is a super-tough 11-Spoke wheel designed to mimic the look of full-size Off-Road Trucks! Pro-Line’s new F-11 wheel features scale bolt head details and a swept back face that will stand out from the crowd of boring wheels. This wheel will accept all Pro-Line 3.8″ Traxxas® Style Bead tires along with all Stock Traxxas® 3.8″ tires, giving you a ton of rubber options. This 17mm hex wheel is sure to make your truck stand out from the rest, so get some today!


Trencher X SC 2.2″/3.0″ M2 (Medium) Tires Mounted on Black Renegade Wheels for Short Course Trucks

#1190-13 – for Slash® [R] and Slash® 4X4 [F/R]
#1190-18 – SCTE 4X4 and ProTrac™ Kits

trencher x sc mounted on renegade wheels

This is a pair of Pre-Mounted Trencher X SC Tires on Renegade Black Wheels. Pro-Line is very excited to announce the availability of the Trencher X SC pre-mounted to the wheel that you need. We take the guess work out of your glue job by doing the mounting for you so you can spend your time having fun! You will never tread lightly with your Short Course (SC) Truck again with Pro-Line’s new Trencher X SC tires. The Trencher tires are designed to give your short course truck optimal traction on just about any surface. Realistic shaped treads give your short course truck a scale look while offering ridiculous amounts of forward bite. The tall tread will also offer traction in many different terrains and deliver durability that is second to none. The Trencher X improves on the original with extra width and even more stump pulling traction!
Radical, revolutionary maybe even a bit of an outlaw, that is what a Renegade is all about and it defines the new SC wheels from Pro-Line to a “T”. That’s right, the design department at Pro-Line thought it was time to change it up and bring to life another bold looking SC wheel. The Pro-Line Renegade wheel for SC trucks features a tough 10 spoke design replicating the latest in high performance full size forged racing wheels used by the pros. Detailed beadloc and lug nut hardware only adds to the realism. Be the Renegade at your track.


ION 2.2” 2WD MC (Clay) Off-Road Buggy Front Tires for 1:10 Buggy

#8224-17

ion 2wd fronts in clay compound

This is a pair of ION 2.2” 2WD Buggy Front Race Tires. The ION proved electrifying from the start, taking the win the First time it touched the Track! The ION was designed from the ground-up to be the ultimate front tire requiring zero break-in period and ground breaking performance! The ION fits perfectly in Pro-Line’s line-up of 2WD front tires because it provides more steering than the Scrubs and less steering than the Suburbs, giving you the option to choose the perfect tire for your current track condition! The unique molecular structure tread design provides unbelievable high-speed and low-speed steering that provides the correct balance and feel that racers are looking for. Experience the difference these top performing Pro-Line tires make for yourself – Own some ION tires today!


Pro-Line Stabilizer 7” 1:10 Buggy Wing for 1:10 Buggy

#6248-00

7-inch stabilizer wing

This is a Pack of Pro-Line Stabilizer 6.5” 1:10 Buggy Wings. Pro-Line’s new Stabilizer Wing combines everything that serious buggy racers are looking for: Performance, Style & Durability. From the moment that you put Pro-Line’s new wing on your buggy you will be amazed at the increase in rear traction and high-speed stability. The Stabilizer Wing features a stepped side wing profile to clear the rear tires but also adds much needed durability. Speaking of durability, buggy wings take a beating with each crash so Pro-Line made the Stabilizer Wing out of super thick Genuine Lexan and includes 2 Wings in each pack. Get to the top step of the box with Pro-Line’s new Stabilizer Wing for 1:10 Buggy!


BullDog Clear Body for T4.2

#3397-00

bulldog for t4point2

This is a BullDog Clear Body for T4.2.  Pro-Line has improved the BullDog series once again by adding enhancements that will make you go faster!  The new T4.2 Bulldog features a new Mohawk down the center of the roof that improves high-speed stability and adds an aggressive look.  The front end geometry has also been reshaped and improved to achieve higher front down force and reduce wheelies that cost precious time.  Get the most advanced body for your T4.2: Release the BullDog!


High Downforce BullDog Clear Body for D812

#3399-00

high downforce bulldog for d812

This is a High Down-Force BullDog Clear Body for D812. Pro-Line went all-out for the World Championships in Argentina with a special High Down-Force BullDog body for the unique track conditions. Every effort on the HD BullDog was made to improve the rear Down-Force and add high-speed stability, which improve lap times significantly on tracks with a long straight-away and few jumps. Large vertical fins extend out of the roof line and air channels extend over the length of the body to achieve maximum straight line stability. The rear portion of the HD BullDog features a scooped spoiler that provides the improved Rear Down-Force, giving your buggy a more balanced and stable feel at high-speeds. Do you want to run the exact same body as the Pros ran at the World Championships? Then you need Pro-Line’s New HD BullDog body!


High Downforce BullDog Clear Body for RC8.2

#3399-00

high downforce bulldog for rc8point2

This is a High Down-Force BullDog Clear Body for RC8.2. Pro-Line went all-out for the World Championships in Argentina with a special High Down-Force BullDog body for the unique track conditions. Every effort on the HD BullDog was made to improve the rear Down-Force and add high-speed stability, which improve lap times significantly on tracks with a long straight-away and few jumps. Large vertical fins extend out of the roof line and air channels extend over the length of the body to achieve maximum straight line stability. The rear portion of the HD BullDog features a scooped spoiler that provides the improved Rear Down-Force, giving your buggy a more balanced and stable feel at high-speeds. Do you want to run the exact same body as the Pros ran at the World Championships? Then you need Pro-Line’s New HD BullDog body!


BullDog Clear Body for 8ight E 2.0

#3402-00

bulldog for 8e2point0

This is a BullDog Clear Body for 8ight-E 2.0. Pro-Line now offers a BullDog body specifically designed for the Electric 8ight-E 2.0! This new body has clearance for the large battery packs that are common in Electric 1/8th scale racing and has oversized vents front and rear to allow maximum airflow over the sensitive electronics. The 8ight-E 2.0 BullDog features the latest in BullDog performance and styling. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. This is a must have body for the new racing season!


BullDog Clear Body for B4.2

#3403-00

bulldog for b4point2

This is a BullDog Clear Body for B4.2. Pro-Line now offers a BullDog body for the B4.2! This new body has enhanced styling and features that perform better than ever. The roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. The B4.2 BullDog features large air vents in the front and rear to help keep your electronics running through long practice sessions and main events. This is a must have body for the new racing season! Get the new B4.2 BullDog body today!


BullDog Clear Body for Losi 22

#3404-00

bulldog for tlr22

This is a BullDog Clear Body for Losi 22 in Rear Motor Configuration. Pro-Line has a New BullDog body for the Losi 22! This new body has enhanced styling and features that perform better than ever for the guys that run their 22 in the Rear Motor Configuration. The roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. The 22 BullDog features air vents in the front and rear to help keep your electronics running through long practice sessions and main events. This is a must have body for the new racing season! Get the new 22 BullDog body today!

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 3:53 PM
Air Age Media ©