Dynamite Platinum Sensored ESC

Dynamite Platinum Sensored ESC

This new ESC is designed for no-timing “blinky” spec racing, has a 13.5T brushless motor limit, and comes pre-wired with a high-current EC3™ battery connector. Check out more details below:

Features:

  • Small footprint for easy installation in 1/10 and 1/12-scale RC vehicles
  • Sensored brushless technology provides improved top speed and torque with smooth, cog-free acceleration
  • Timing Mode provides peak performance
  • Blinky Mode complies with ROAR rules for racing in No-Timing Spec classes
  • Low voltage protection for 2S Li-Po batteries
  • Comes pre wired with high-current EC3™ battery connector

Specs:

Auto Cutoff: Yes
BEC Voltage: 6V
Brake: Yes
Continuous Current: 70A
Forward: Yes
Full On Resistance: 0.0006 ohms
Height: 0.74 in (18.7mm)
Input Connector Types: EC3
Input Voltage: 7.2-8.4V
Length: 1.3 in (32.3mm)
Low-Voltage Cutoff Programmable: Yes
Maximum Burst Current: 120A
Motor Limit: 13.5T
Output Connector Types: Direct solder
Overload Protection: Yes
PWM Frequency: 16KHz
Reverse: Yes
Time Delay Brake: Yes
Weight: 1.92 oz (54.4g)
Width: 1.1 in (27.4mm)

DYNP1001 – $89.99

DYNP1001

If you like this article, check out this additional article on Dynamite.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: March 6, 2013 — 11:40 AM
Air Age Media ©