Novak Micro Pro Brushless ESC And 8.5T Brushless Motor Combo

Novak Micro Pro Brushless ESC And 8.5T Brushless Motor Combo

Novak releases a new Micro Pro Brushless ESC that is also avaialble in a 8.5T motor combo. Check out the press release below for more info:

Do you crave power, want extremely smooth driving, and haven’t yet found a micro system that works right? Look no further! Micro-sized, pro-level, pure sensor-based bliss has arrived in the form of the Novak Micro Pro Brushless System (#3056). Micro vehicles may be small in size, and because of this, demand a smoother delivery of power while remaining linear and responsive enough to make driving fun. Novak’s 100% sensor-based system delivers the most consistently smooth, yet responsive and linear feel, time and time again. The Micro Pro ESC has been designed specifically for 2S battery packs and features Novak’s sophisticated Dynamic Timing Advance™. This means you can turn on the boost to unlock even more power and speed from the super-fast, 8.5-turn Novak Three-80 motor. Keeping ahead of 3S voltage setups is no problem!

The Novak Micro Pro Brushless System (#3056) is scheduled for shipment in February 2013. The Micro Pro Brushless ESC (#1856) is also available and is compatible with Novak’s Three-80 Micro Pro (#3450-3455) and other 380-size sensor-based brushless motors. Refer to the Novak website for further product details.

PRODUCT HIGHLIGHTS

  • Full featured, high-performance, affordable, pure sensor-based brushless system for 4WD and 2WD 1/18 to 1/14 scale setups
  • Five unique throttle profiles that can be tuned individually and saved independently for numerous pre-set and custom driving options
  • Novak Super-Tuner™ firmware with multiple on-board adjustable settings for quick and complete custom tuning, including Dynamic Timing Advance™
  • Proven-platform sensored micro motor that is tunable and serviceable
  • Factory wired with bullet motor connectors for easy installation
  • Designed, built, tested and supported by Novak in Irvine, CA

SPECIFICATIONS

Input Cells: 1*-2S LiPo or 4-6 cell NiMH (* use #5677 Booster Module)
ESC Size: 1.15” x 0.95” x 0.66” (29.0 x 24.3 x 16.8mm)
BEC: 6.0 VDC/ 2.0A
Wire Size: 16Ga
Motor Size: 1.02” D x 1.48” L (26 x 37.7mm)
Motor Shaft Diameter: 0.125” (accepts all existing pinion gears)
Motor Kv: 9,000 RPM/Volt

3056 – Novak Micro Pro Sensored Brushless System- 8.5T – $200 – February 2013
1856 – Novak Micro Pro Brushless ESC – $149 – February 2013

Micro Pro Brushless ESC

If you like this article, check out this additional article on Novak.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: January 11, 2013 — 9:01 AM
Air Age Media ©