JConcepts SC10 Carbon Fiber Front Body Mount, B44.2 Monroe Carbon Fiber Battery Brace, And Traxxas Silent Speed Spur Gear

JConcepts SC10 Carbon Fiber Front Body Mount, B44.2 Monroe Carbon Fiber Battery Brace, And Traxxas Silent Speed Spur Gear

JConcepts releases new carbon fiber gear including this front body mount for the SC10 that will help to provide more body support and perfomance on the track.  Check out the press release below for all the details:

JConcepts adds another top quality carbon fiber accessory to the already hefty list for the SC10 line of vehicles with the SC10 front body mount. Support of the body mass is very critical in SCT performance and shoring up the front body mount flexibility was a major focus with this new front body mount. Heavy-duty but light-weight, 3mm carbon fiber is the base of the design which follows along the geometry and stock mounting holes on the SC10 front shock tower. Recessed portions allow for the adjustable mount towers to drop straight into place and fasten with the stock socket-head hardware. Some aesthetically pleasing pockets have been machined into the face of the mount, lowering the overall weight of the part and for brand recognition.

Secure the carbon front body mount to the shock tower by sliding the shock mount screws back through the carbon fiber mount and reattach the shocks. Pin the carbon fiber mount to the tower with the included 4-40 x 5/16” screw. In just several short minutes a driver can disassemble the stock plastic front body mount assembly and replace with a more rigid carbon fiber mount for more body support and a higher performance on-track feel.

Features:

  • Original JConcepts design
  • 3mm Carbon Fiber material
  • Fits on all SC10 trucks
  • Includes 1 – flathead screw for clean installation
  • Aesthetic eye-candy

JConcepts – SC10 Carbon Fiber front body mount
Part # – 2233
Retail price – $20.00
(Fits – Team Associated SC10 vehicles)

2188_600px

B44.2 Monroe Carbon Fiber battery brace

A much underrated aspect to working and maintaining any vehicle is the ability to install and remove the battery pack in a quick and precise manner. The Monroe carbon fiber battery brace for the B44.2 addresses all the needs of the racer in one simple package. Constructed in genuine 2.5mm carbon fiber material, the Monroe packs a light-weight punch from the beginning. The slim and light-weight design allows it to swing 90 degree articulation which provides the necessary amount of room to install or remove the saddle battery packs.

Security is provided by utilizing the stock hardware with the pivot ball used in the rear and lever / latch system in the front. Swing the lever to open and close and the Monroe provides the room to easily exchange battery packs on the fly.

Features:

  • Original JConcepts design
  • 2.5mm Carbon Fiber material
  • Fits on all B44.2 buggy kits
  • Easy battery access design
  • Utilizes stock mounting hardware
  • Aesthetic eye-candy

JConcepts – B44.2 Monroe Carbon Fiber battery brace – 2pc.
Part # – 2188
Retail price – $25.00
(Fits – Team Associated B44.2)

2154_600px.8M, 54T, SS Machined Spur Gear

Gear-up or Shut-up. JConcepts introduces Silent Speed spur gears for Traxxas Slash 4×4, Stampede 4×4 and Rally.

The heart of any R/C vehicle is the transmission, at the top of the transmission lies the spur gear; an integral part of racing performance. Designed with several key aspects in focus, JConcepts introduces the Silent Speed line of spur gears for select Traxxas vehicles.

Spur gears or straight-cut gears are some of the simplest forms of gears; however they directly influence the ratio, speed and sound of R/C vehicles and they are extremely important. These gears when meshed together correctly provide the transfer of power from the motor to the transmission and are one of the key elements in the versatility and sound of the vehicle.

Silent Speed Spur Gears for Traxxas vehicles

Test and confirm, trial and prototype makes JConcepts products great performers. The Silent Speed precision machined spur gears from JConcepts specifically designed for the popular Traxxas vehicles are now available. All details are considered so they are a direct bolt-on piece with the convenience of the tooth marking and security of the precision design, pack a meticulously packaged product. Silent Speed for the Slash 4×4, Stampede 4×4 and Rally are hot off the development line and ready to hop-up the most popular assortment of vehicles on the market.

Features:

  • JConcepts simple design and function
  • Precision machined for durable and concentric design
  • Machined to indicate size
  • Fits, Slash 4×4, Stampede 4×4 and Rally
  • JConcepts – World Proven Innovation and Design

JConcepts – .8M, 54T, SS Machined Spur Gear
Part # – 2154
Retail price – $11.00
(fits Traxxas Slash 4×4, Stampede 4×4, Rally)

[nggallery id=1114]

If you like this article, check out this additional article on JConcepts.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 4:14 PM
Air Age Media ©