LRP Flow WorksTeam ESC: In Stock And Shipping + Firmware Updates

With an already outstanding pre-release performance at the 2012 I.F.M.A.R. TC Worlds, 2012 Off Road R.O.A.R. Super Nationals, KO Grand Prix, and The Spektrum Off-Road Challenge, the FLOW WorksTeam is sure to be the most sought-after competition brushless speed control on the market.

The hardware and software of the Flow WorksTeam have been designed completely from scratch; the speed control can now be universally used with modified and stock motors. Due to the multitude of mode setup options, the Flow WorksTeam can be precisely adapted to both modified and stock class racing.

Features:

• Modified and Stock Racing – All-purpose onroad and offroad software for modified and stock classes, including boost 0
• Multi-mode profile adjustment – 7 fully adjustable parameters for stock and modified: auto brake, feel, torque timing, boost timing, boost angle, boost turbo, and cutoff voltage
• HD aluminum case – For lowest core temperature and tough race design
• All-New 6V/3A linear BEC
• Easysolder U-Tab Design – Heavy copper, multilayer PCB for low resistance
• X-Brake Pro – New, efficient, and precise brake software
• Revolutionary Internal Temp Check System 3 – Allows you to read out the maximum internal temperature for both the speedo and motor
• Extra small size – 32 x 34 x 21mm size for easy installation
• Included plug-in high-performance fan

Visit this software update link following and choose which firmware version is appropriate for your racing application:

http://www.lrp.cc/en/service/software-update/

• V5.0 – Flow WorksTeam/Competition STOCK RACING SOFTWARE
• V4.0 – Flow WorksTeam/Competition ON ROAD MOD SOFTWARE
• V3.3 – Flow WorksTeam/Competition OFF ROAD MOD SOFTWARE

The following are available now:

#LRP80970
Flow WorksTeam Brushless Speed Control

#LRP81801
USB Update Bridge Spec 2

If you like this article, check out this additional article on LRP.