Team Associated RC10R5.1 Factory Team Kit

Team Associated RC10R5.1 Factory Team Kit

This kit is loaded with an ultra-rigid 2.5mm thick carbon-fiber chassis, a wide three-point rear pod optimized for brushless motors, a carbon-fiber motor mount cross brace, and much, much more. Check out all the features in the press release below:

The RC10R5.1 Factory Team Kit takes the next evolutionary step into the growing 1:10 scale World GT on-road racing class. With 35 years of 1:12 and 1:10 scale on-road racing experience, Team Associated’s 10R5.1 comes from a long line of high-performance pan car chassis’ with a race-winning pedigree.

Taking the design cues and revisions from the highly successful RC12R5.2 platform, the 10R5.1 has incorporated these improvements, pushing chassis performance to the next level. Sharing what is arguably the best pan car front end design to date, the I.F.M.A.R. World Championship-winning Dynamic Strut front end features symmetrical components with adjustable caster and track width, and updated lower control arms with more accurate mounting for a more precise build every time.

The 10R5.1 now employs the wide three-point rear pod that has been optimized for brushless motors. The rear blue aluminum bulkheads are tied together with a carbon-fiber motor mount cross brace to gain further rear end rigidity and durability.

The backbone of the 10R5.1 consists of an ultra-rigid 2.5mm thick carbon-fiber chassis with integrated chassis-stiffening rails. The chassis-stiffening rails provide a centralized LiPo battery mounting position that fits R.O.A.R.-approved 3.7V and 7.4V LiPo battery packs and easily facilitates front-to-rear weight bias adjustments.

The 10R5.1 also shares the rear suspension that has been proven on the 12R5.2. The center shock uses the through-shaft design, giving equalized damping throughout the full stroke of the shock in both directions without any unwanted rebound. Roll is controlled with the new side damper tubes that offer smoother rear pod movement and easier maintenance. The 10R5.1 puts this all together for a rear end that hooks up and stays hooked up throughout the imperfections of the track surface, all making for faster lap times.

Features:

  • I.F.M.A.R. World Championship-winning Dynamic Strut front suspension features symmetric components with adjustable caster and track width
  • Updated motor mount and left rear bulkhead for increased durability
  • A 3-point upper pod plate with graphite motor mount cross-brace, optimized for brushless motors
  • Ultra-rigid 2.5mm thick carbon fiber chassis with integrated chassis stiffening rails featuring centralized LiPo battery mounting position that fits R.O.A.R.-approved 3.7V LiPo battery packs
  • Aluminum side spring retainers for easier and more accurate adjustments
  • Innovative through-shaft center shock
  • Side damper tubes reduce friction for smoother rear pod movement
  • Pivot-ball rear pod design with hard-anodized aluminum pivot balls and updated rear pod links

Specifications:

Power Source: Electric
Terrain: On-Road
Body Style: Other
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: varies
Width: varies
Wheelbase: 259mm (10.2in)
Weight: varies
Drive: 2WD

* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required to Complete

  • R/C two channel surface frequency radio and receiver
  • 1:12 scale sized servo
  • 540 sized 1:10 scale electric motor
  • 1S or 2S LiPo battery pack
  • Battery charger (specific for charging LiPo batteries)
  • Electronic Speed Control (ESC)
  • 64-pitch pinion gear (size determined by battery and motor combination)
  • 1:10 scale polycarbonate race body
  • Polycarbonate specific spray paint
  • 1:10 scale foam tires

#8022

[nggallery id=1031]

If you like this article, check out this additional article on Team Associated.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 4:20 PM
Air Age Media ©