Avid SC10 12mm Hex Conversion Kit

Avid SC10 12mm Hex Conversion Kit

Upgrading your pin drive SC10 to 12mm hex wheels never got easier thanks to this 12mm hex conversion kit from Avid. This kit comes pre-assembled with all the necessary hardware to upgrade your Factory Team or RTR SC10. Check out the press release below for all the info:

Upgrade your SC10 FT or SC10 RTR to use 12mm hex wheels with the pre-assembled AVID SC10 12mm Hex Conversion Kit. Using genuine Team Associated steering blocks and front axles, AVID pre-assembled the steering blocks with our 12mm front clamping hex adapters, Revolution bearings, and solid axle pins. No more hunting around for all the individual parts. AVID has done the work for you with an all inclusive conversion kit.

The conversion kit also includes solid axle pins, 12mm clamping hexes for the rear axles, and kit is capped off with a set of 4 black anodized aluminum wheel nuts.

Fits:

  • SC10 Factory Team
  • SC10 RTR

Why get a conversion: The 12mm hex conversion allows you to use the same 12mm hex wheel on both front and rear of your truck. This means that you can test endless tire combinations and also re-use your older rear tires on the front. The other benefit is that you only have to purchase 1 type of wheel and there are many versions to choose from. Of course, we hope you’ll try our 12mm Sabertooth SC10 +3mm wide-track wheels which are offered in black, white, and yellow.

AV1001-CONV Conversion kit includes over $40.00 in parts all in one bag:

  • Pre-Assembled Steering blocks and front axles with AVID bearings and clamping hexes.
  • AV1001-SET SC10 12mm Clamping Hex Adapters (set of 4)
  • AVID 3/16” x 3/8” Revolution series bearings (4)
  • AVID 1/16” Solid Axle Pins (4)
  • 8-32 black aluminum locking wheel nuts (4)
  • 4-40 black aluminum mini locking nuts (2)

The conversion kit is assembled using Team Associated part #9880 steering block and #9881 SC10 RS front axle. Some additional assembly is required, instructions not included. 12mm hex wheels not included.

AV1001-CONV SC10 12mm Hex Conversion Kit SC10 F.T. or SC10 RTR $45.00
Available now

Products page links:

http://avidrc.com/product/5/accesori…ccesories.html

[nggallery id=1000]

If you like this article, check out this additional article on Avid.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 4:20 PM
Air Age Media ©