Pro-Line September 2012 New Releases

Pro-Line September 2012 New Releases

PRO-2 LCG Performance Chassis for Slash 2WD

This is Pro-2 Performance Chassis Conversion Kit for the Slash® 2WD. The 2WD Slash® is one of the most important and successful vehicles in the History of RC because it brought affordable scale realism to the masses. Since its release, racers have been modifying and hopping up every aspect of the vehicle to improve its performance but they have always been stuck with a chassis that is 2 inches too high… until now! After a long time of design, development and testing, Pro-Line is proud to release the Pro-2 Performance chassis, which has been specifically designed to bring your Slash® up to racing specifications. Every feature you would expect to find in a high-end race chassis is now available for your Slash®. This new Pro-2 Performance Chassis also goes along great with Pro-Line’s Performance Transmission!

Super Tough 7075 Aluminum Chassis

Short Course trucks take a beating and nothing is as durable and long-lasting as Hard Anodized Aircraft-grade Aluminum. The super narrow and sleek Pro-Line chassis extends from the front bulkhead to completely underneath the Transmission for complete protection and uniform stiffness front to rear. Everything mounts down the center-line of the chassis for perfect side-to-side weight bias. Installation is also easy with Instructions included and each bag of parts separated by assembly steps. Each part bag is also available separately for replacements directly through Pro-Line.

Completely Adjustable Weight Bias

The Battery and ESC placement are easily adjustable to achieve the ideal weight bias for your track’s current conditions. The Battery can be placed from all the way in front, right behind the laid-down servo, to the very back against the shock tower. That gives you 7.5” of room front to back to find the ideal spot for the heaviest single component in your vehicle. The ESC can be placed either directly on the chassis for the ultimate in Low Center of Gravity or on the removable Top Deck to allow the battery to slide underneath. Pro-Line engineers also accommodated “Shorty” battery packs to give you the option to run a super-lightweight setup. When you need more steering, simply move the battery forward and when you need more rear traction, slide the battery back. It’s that easy!

Durable Aluminum Servo Mounts and Steering Posts

The servo is secured by beefy Hard Anodized Aluminum mounts that lay the servo down for the lowest center of gravity possible. The Pro-2 Performance Chassis kit also includes Aluminum Steering Posts for the strongest and smoothest steering rack mount possible. The Servo area also features Blue-Anodized Aluminum washers and spacers to give it that Pro-Line Blue touch.

Jet Fighter Inspired Side Pods and Bumpers

There are so many other awesome features that make Pro-Line’s Pro-2 Performance Chassis a must have for Slash® owners. The side pods reduce chassis flex and provide a convenient location for the Velcro® battery straps. The functional and removable side bumpers are inspired by Jet Fighter wings and finish off the futuristic look of the Pro-2 Performance Chassis.

If you can only do one upgrade for your Slash®, no question Pro-Line’s Pro-2 Performance Chassis is the one to get! Be the first at your Track to take down the competition with your Pro-Line built Slash®: ProTrac, Power Stroke, Transmission and Pro-2 Chassis! Transform your vehicle into a True Racing Machine – Order your Pro-2 Performance Chassis Today!

What’s Included:

  • Complete unassembled LCG Chassis Conversion kit for Slash® 2WD

Fits:

  • Traxxas® Slash® 2WD

6093-00 | PRO-2 LCG Performance Chassis – $127.46

RC Car Action - RC Cars & Trucks | Pro-Line September 2012 New Releases
Chevy Silverado HD Clear Body for Slash 2WD & Slash 4×4 (with Pro-Line Extended Body Mounts)
This is a Chevy® Silverado™ HD Clear Body for the Slash® 2WD and Slash® 4×4. It is time to man up and go HD with Pro-Line’s new Chevy® Silverado™ HD scale truck body! Pro-Line now gives you the option to convert your Slash® Short Course Truck into a True-Scale Lifted Truck. This scale truck body is perfect for making your friends jealous and giving your Truck a completely different look! Don’t show up to the local bash spot or track with the same body as everyone else… Get your True-Scale Chevy® Silverado™ HD body from Pro-Line today!

Note: This body requires extended body mounts for proper body fit.

Features:

  • Amazing Licensed Chevy Scale Looks
  • Transforms your Slash® into a Tough Lifted Truck
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Truck

  • Made in the USA, since 1982

What’s Included:

  • Chevy Silverado HD Clear Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • Traxxas® Slash® ( with Pro-Line Extended Body Mount #6070-00 )
  • Traxxas® Slash® 4×4 ( with Pro-Line Extended Body Mount #6087-00 )

Spec:

Length: 20.7″ (526mm)
Width: 9.3″ (236mm)
Height: 6.0″ (152mm)
Wheel Base: 12.9″ (328mm)

3385-00 | Chevy Silverado HD Clear Body – $36.51

RC Car Action - RC Cars & Trucks | Pro-Line September 2012 New Releases
ION SC 2.2″/3.0″ MC (Clay) Tires for Short Course Trucks Front or Rear
This is a pair of ION SC 2.2”/3.0” Race Tires. The ION proved electrifying from the start, taking the ROAR National Championship in Pro-2 SC at the hands of Ryan Cavalieri! The ION was designed from the ground-up to be the ultimate indoor clay tire requiring zero break-in period and ground breaking performance. The unique molecular structure tread design provides unbelievable forward and side traction not yet achieved in any indoor race tire to date. Even with the super-low tread height, maximum wear is reached by the alternating dual center lugs. The ION is also extremely easy to drive due to the super-smooth side tread that flows organically out of the tire sidewall. Experience the difference these top performing Pro-Line tires make for yourself – Own some ION tires today!

Please note: All tires & wheels are sold in pairs, unless otherwise noted.

Features:

  • Electrifying Performance – Already a ROAR National Champion
  • Unmatched traction on Indoor Clay tracks
  • Molecular Structure Inspired Tread Design
  • High density, reusable Closed Cell inserts included
  • Side Tread that flows Organically out of the Sidewall for drivability
  • For use with Pro-Line 2.2″ X 3.0″ Wheels and stock Slash®, Slash® 4×4, Slayer®, Blitz & SC10 wheels
  • Made in the USA, since 1982

What’s Included:

  • ION SC tires (2 pcs)
  • Closed Cell Foam Inserts (2 pcs)

Spec:

Height: 4.14″ (105mm)
Width: 1.81″ (46mm)

1191-17 | ION SC 2.2″/3.0″ MC (Clay) Tires – $24.18

RC Car Action - RC Cars & Trucks | Pro-Line September 2012 New Releases
BullDog Clear Body for Traxxas Stampede 2WD/4×4
This is a BullDog Clear Body for the Stampede® 2wd and Stampede® 4×4. Are you looking to add increased performance and race styling to your Stampede®? Look no further than Pro-Line’s new BullDog body specifically designed for your Stampede®! While testing the new Pro-Line Transmission in our high-speed Stampede®, we grew frustrated that the stock body kept catching air at full throttle and causing scary high-speed wheelies and crashes. The aerodynamics of the BullDog have been designed for amazing high speed stability and front down force so you can reach higher speeds than ever before. The new Pro-Line BullDog is a must have body for all the Stampede® Speed Freaks! Get yours today!

Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only.Body painted by Darkside Designs.

Features:

  • Amazing High Speed Stability
  • Awesome BullDog race truck styling
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Truck

  • Made in the USA, since 1982

What’s Included:

  • BullDog Body Clear Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • Traxxas® Stampede® Electric (shown)
  • Traxxas® Stampede® Nitro
  • Traxxas® Stampede® 4X4

3390-00 | BullDog Clear Body for Stampede – $24.18

RC Car Action - RC Cars & Trucks | Pro-Line September 2012 New Releases
BullDog Clear Body for Electric Rustler
This is a BullDog Clear Body for the Electric Rustler®. Are you looking to add increased performance and race styling to your Electric Rustler®? Look no further than Pro-Line’s new BullDog body specifically designed for your Rustler®! The aerodynamics of the BullDog have been designed for amazing high speed stability and front down force so you can reach higher speeds than ever before. The unique Bulldog styling will bring your Rustler® up to speed with the latest cutting edge looks found all over the race track. The new Pro-Line BullDog is a must have body for all the Rustler® Speed Freaks! Get yours today!

Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only.Body painted by Darkside Designs.

Features:

  • Amazing High Speed Stability
  • Awesome BullDog race truck styling
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Truck

  • Made in the USA, since 1982

What’s Included:

  • BullDog Body Clear Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • Traxxas® Rustler® Electric

3391-00 | BullDog Clear Body for Electric Rustler – $24.18

RC Car Action - RC Cars & Trucks | Pro-Line September 2012 New Releases
ION MC (Clay) Off-Road 1:8 Buggy Tires for Front or Rear
This is a pair of ION 1:8 Buggy Race Tires. The ION proved electrifying from the start, taking the ROAR National Championship in Electric 1:8 Buggy at the hands of Ty Tessmann! The ION was designed from the ground-up to be the ultimate indoor clay tire requiring zero break-in period and ground breaking performance. The unique molecular structure tread design provides unbelievable forward and side traction not yet achieved in any indoor race tire to date. Even with the super-low tread height, maximum wear is reached by the alternating dual center lugs. The ION is also extremely easy to drive due to the super-smooth side tread that flows organically out of the tire sidewall. Experience the difference these top performing Pro-Line tires make for yourself – Own some ION tires today!

Features:

  • Electrifying Performance – Already a ROAR National Champion
  • Unmatched traction on Indoor Clay tracks
  • Molecular Structure Inspired Tread Design
  • High density, reusable Closed Cell inserts included
  • Side Tread that flows Organically out of the Sidewall for drivability
  • Made in the USA, since 1982

What’s Included:

  • ION 1:8 Buggy tires (2 pcs)
  • Closed Cell Foam Inserts (2 pcs)

Spec:

Height: 4.28″ (109mm)
Width: 1.68″ (43mm)

9047-17 | ION MC (Clay) Off-Road 1:8 Buggy Tires – $24.18

[nggallery id=965]

If you like this article, check out this additional article on Pro-Line.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 4:03 PM
Air Age Media ©