Pro-Line August 2012 New Releases

Pro-Line August 2012 New Releases

Pro-Line has released a ton of new gear including a clear 2012 Ford Focus ST body that you custom paint and then mount on your short course truck using their new extended body mount kits. Check out all the new products in the press release below:

2012 Ford Focus ST Clear Body for Slash, Slash 4×4 and SC10 (with Pro-Line Extended Body Posts), Ten-SCTE & XXX-SCT

This is a 2012 Ford Focus ST Body for your Short Course Truck. Pro-Line is innovating once again and bringing new life to your SC truck by transforming your truck into a Rally Car! Rally racing is an extremely popular motorsport around the world and now you can make your truck look just like the real thing. The Ford Focus ST is a highly stylish body that also proved to be extremely competitive on the World Rally stage. Now you can drift, slide and jump with style using Pro-Line’s new 2012 Ford Focus ST body for your SC truck! For a more scale wheel/tire combo, put on some 2.8” wheels and low-profile tires (Road Rage 2.8″ or Dirt Hawg 2.8″)!

*Note: Most SC trucks will require extended body mounts for proper body fit*

Features:

  • Convert your SC Truck into a Rally Racer
  • Awesome 2012 Ford Focus ST styling
  • Made with Crystal Clear Genuine GE Lexan®
  • If trimming body at full length, front and rear bumper modification/trimming is required to fit under the body
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Truck

  • Made in the USA, since 1982

What’s Included:

  • 2012 Ford Focus ST Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • Traxxas® Slash® ( with Pro-Line Extended Body Mount #6070-00 )
  • Traxxas® Slash® 4×4 ( with Pro-Line Extended Body Mount #6087-00 )
  • Associated SC10 ( with Pro-Line Extended Body Mount #6071-00 )
  • Losi XXX-SCT
  • Losi TEN-SCTE 4WD

Specs:

Length: 22.0″ (559mm)
Width:
at doors 11.0″ (279mm)
Height: 6.2″ (157mm)
Wheel Base: 13.0″ (330mm)

3367-00 – 2012 Ford Focus ST Clear Body – $35.66

RC Car Action - RC Cars & Trucks | Pro-Line August 2012 New Releases

Tazer 2.2″ Off-Road Buggy Rear Tires for 2.2″ Rear 1:10 Buggy Wheels

This is a pair Tazer 2.2″ Rear Buggy Tires. Pro-Line has stunned the competition and shocked the racing community with the latest in high-performance race tire technology: the Tazer. With the inputs of World Class drivers Ty Tessmann and Ryan Cavalieri, Pro-Line has created a race tire that provides unmatched forward bite in loose and dusty track conditions without the undesired edginess. The Tazer features large overlapping center treads that will last throughout the long A-mains and perfectly sized lugs that will propel you to the top of the podium. The Tazer is designed as a replacement to the original Buggy Holeshot for loose conditions, while the Holeshot 2.0 is best for hard-packed conditions. Bring the competition to its knees – Get some Tazers today!

Features:

  • Inspired by World Class racer Ty Tessmann and Ryan Cavalieri
  • Incredible forward traction in dusty conditions
  • Represents newest in tire tread technology
  • Made in the USA, since 1982

What’s Included:

  • Tazer Rear Buggy tires (2 pcs)
  • Foam Inserts (2 pcs)

Specs:

Height: 3.43″ (87mm)
Width: 1.72″ (44mm)

8221-02 | Tazer 2.2″ M3 (Soft) Off-Road Buggy Rear Tires $13.98
8221-03 | Tazer 2.2″ M4 (Super Soft) Off-Road Buggy Rear Tires $14.83

RC Car Action - RC Cars & Trucks | Pro-Line August 2012 New Releases

Hole Shot 2.2″ 2WD Off-Road Buggy Front Tires for 2.2″ 2WD Buggy Front Wheels

This is a pair of Hole Shot 2wd Front Buggy Tires. 2WD Buggy racing has made a huge comeback and Pro-Line is expanding our tire line-up to give you an advantage in every race condition. If you race your buggy outdoors, then you need Pro-Line’s new Hole Shot 2WD Front Tires. Unlike the typical ribbed front tire, the new Hole Shot 2WD fronts are super smooth while still maintaining all the steering you need. Ribbed fronts are known for doing the catch-and-grab at the wrong time leading to inconsistent handling. Pro-Line’s new Hole Shot 2wd Front tires set the new standard in steering for every outdoor track condition, from super loose to hard-packed. Lead the pack at your local track and get Pro-Line’s new Hole Shot Front Tires Today!

Features:

  • Super Smooth Front Tire Ideal for Outdoor Track Conditions
  • Based on the Legendary Holeshot Tread Pattern
  • Next Generation Front Tire Technology – Makes Ribbed Fronts Obsolete
  • Available in M3 (Soft) and M4 (Super Soft) compounds
  • Made in the USA, since 1982

What’s Included:

  • Hole Shot 2.2” Front Buggy tires (2 pcs)
  • Foam Inserts (2 pcs)

Specs:

Height: 3.33″ (85mm)
Width: 1.18″ (30mm)

8220-02 | Hole Shot 2.2″ 2WD M3 (Soft) Off-Road Buggy Front Tires $13.98
8220-03 | Hole Shot 2.2″ 2WD M4 (Super Soft) Off-Road Buggy Front Tires $13.98

RC Car Action - RC Cars & Trucks | Pro-Line August 2012 New Releases

Extended Front & Rear Body Mounts (Slash 2WD) for Slash 2WD

This is an Extended Body Mount Kit for the Slash 2wd. Pro-Line continues to innovate with more must-have accessories for your Short Course Truck. The all-new Pro-Line body mount kit includes adjustable body mounts so you can fit any body on your truck perfectly, including Rally car bodies! But, the Pro-Line Engineers did not stop there. Instead of just using the same old flimsy body clips that always get lost and bent up, the Pro-Line Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time. No more getting stabbed in the finger by those nasty clips! Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would, but with the added safety, security and styling of Pro-Line’s innovative screw on body mounting system! Get your Extended Body Mount Kit today!

Features:

  • Completely adjustable body mounts so virtually any body will fit perfectly
  • Innovative screw on body mounting system
  • Long body mounts included to fit Rally Car Bodies
  • Made from Ultra-Durable Nylon
  • Replacement parts:
  • 6070-01 Body Mount Plastics
  • 6070-02 Thumbwasher Kit

What’s Included:

  • Body Mounts and Posts (Front & Rear)
  • Mounting Hardware

Fits:

  • Traxxas® Slash®

6070-00 | Extended Front & Rear Body Mounts (Slash 2WD) $12.71

RC Car Action - RC Cars & Trucks | Pro-Line August 2012 New Releases

Extended Front & Rear Body Mounts (Slash 4×4) for Slash 4×4

This is an Extended Body Mount Kit for the Slash 4×4. Pro-Line continues to innovate with more must-have accessories for your Short Course Truck. The all-new Pro-Line body mount kit includes adjustable body mounts so you can fit any body on your truck perfectly, including Rally car bodies! But, the Pro-Line Engineers did not stop there. Instead of just using the same old flimsy body clips that always get lost and bent up, the Pro-Line Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time. No more getting stabbed in the finger by those nasty clips! Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would, but with the added safety, security and styling of Pro-Line’s innovative screw on body mounting system! Get your Extended Body Mount Kit today!

Features:

  • Completely adjustable body mounts so virtually any body will fit perfectly
  • Innovative screw on body mounting system
  • Long body mounts included to fit Rally Car Bodies
  • Made from Ultra-Durable Nylon
  • Replacement parts:
  • 6087-01 Body Mount Plastics
  • 6070-02 Thumbwasher Kit

What’s Included:

  • Body Mounts and Posts (Front & Rear)
  • Mounting Hardware

Fits:

  • Traxxas® Slash® 4×4

6087-00 | Extended Front & Rear Body Mounts (Slash 4×4) $12.71

RC Car Action - RC Cars & Trucks | Pro-Line August 2012 New Releases

Extended Front & Rear Body Mounts (SC10 2WD) for SC10 2WD

This is an Extended Body Mount Kit for the SC10 2wd. Pro-Line continues to innovate with more must-have accessories for your Short Course Truck. The all-new Pro-Line body mount kit includes adjustable body mounts so you can fit any body on your truck perfectly, including Rally car bodies! But, the Pro-Line Engineers did not stop there. Instead of just using the same old flimsy body clips that always get lost and bent up, the Pro-Line Extended Body Mount kit includes a revolutionary screw on body mounting system for a strong and secure mount every time. No more getting stabbed in the finger by those nasty clips! Just screw down the included setscrew into the body mount, place the O-Ring over the setscrew and mount your body as you normally would, but with the added safety, security and styling of Pro-Line’s innovative screw on body mounting system! Get your Extended Body Mount Kit today!

Features:

  • Completely adjustable body mounts so virtually any body will fit perfectly
  • Innovative screw on body mounting system
  • Long body mounts included to fit Rally Car Bodies
  • Made from Ultra-Durable Nylon
  • Replacement parts:
  • 6071-01 Body Mount Plastics
  • 6070-02 Thumbwasher Kit

What’s Included:

  • Body Mounts and Posts (Front & Rear)
  • Mounting Hardware

Fits:

  • Associated SC10

6071-00 | Extended Front & Rear Body Mounts (SC10 2WD) $12.71

[nggallery id=906]

If you like this article, check out this additional article on Pro-Line.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 4:05 PM
Air Age Media ©