JQ Products THECar RTR

JQ Products THECar RTR

THECar is now RTR with Savox servos, a 4mm aluminum chassis, a .21 pullstart engine, and even comes with a receiver pack and 2.4ghz radio system. Check out all the features in the press release below:

We wanted to create a new standard of performance for 1:8th RTR Buggies. By clever design and production arrangements, we have been able to keep the specification of this vehicle high, and as close to the Pro version as possible. The servos and engine have been chosen based on their performance as well as their affordability. We wanted to make sure that the servos are strong and fast enough to be able to control the car, in a similar fashion to actual race cars with top of the line servos. Many RTRs have so slow and weak servos, that they are hard to drive for even experienced racers. This is not the case with this RTR, as the Savöx servos are strong and fast enough for the task. The engine is a standard pullstart RTR unit, and it has more than enough power for this super lightweight RTR, that only weights 3300g. The street price is expected to land at €399 in Europe, and $399 in usd markets.

Specs:

Weight: 3300g
Radio and Receiver: 2.4ghz, with EPA, Dualrate and Trim
Receiver Pack: 1200 NiMh
Engine: .21 Pullstart
Steering Servo: Savöx SC0253MG, 0,14sec/8kg all metal gear servo
Throttle/Brake Servo: SC0352, 0,13sec/6,5kg
Tyres: Multi surface preglued tyres on THEWheel
Chassis: 4mm Aluminium
Bodyshell: Pre painted lexan body
Driveshafts: Front CVD Driveshaft, Rear Dogbones
Clutch: 3-shoe clutch
Shock Absorbers: Hard Anodised Shocks, 3.5mm shock shaft
Brakes: Twin fibreglass brake disks

Requires:

Glow Starter, 4 AA Batteries for the Transmitter, a standard glowplug and RC Fuel to run

[nggallery id=831]

If you like this article, check out this additional article on JQ Products.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: June 26, 2012 — 4:24 PM
Air Age Media ©