Duratrax RTR 835B 1/8 Nitro 4WD Buggy

Jun 20, 2012 No Comments by

This new nitro buggy from Duratrax comes with a hard-anodized 3.25mm aluminum chassis, big bore shocks, Duratrax 2-channel FTR 2.4GHz radio systemm, and a powerful SuperTigre G-27CX .27 engine that is even backed by a 3-year limited warranty. Check out all the details in the press release below:

There are a lot of tough buggies, but only one that’s guaranteed tough — and that’s the new 1/8 scale Duratrax 835B. It’s loaded with Stress-Tech™ parts, and every one of them is protected by a 1-year replacement guarantee. If any Stress-Tech part fails during the first year, DuraTrax replaces it free.

Other reasons for the 835’s durability include grey-anodized aluminum parts and hardened steel parts in the drivetrain.

Driving the 835B is a SuperTigre® G-27CX .27 engine, a power, a power plant known for dependability and power, it’s protected by a 3-year limited warranty.

The G-27CX .27 demands matching control and Duratrax provides it with a 2.4GHz FTR (Futaba Transmitter-Ready) system. It’s several steps above the usual ready-to-run radio, because it includes digital, metal-geared steering servo, 5-cell receiver pack and a wall charger. And since it’s an FTR system, it’s compatible with all Futaba® 2.4GHz FHSS systems.

While it’s great for sport driving alone, the 835B’s power and radio system also make it a solid contender in venues all the way up to regional contests. Droop screws, hex head hardware and more offer track-tuning flexibility for the up-and-coming competitor all in one value-packed package.

  • Duratrax 2-channel FTR 2.4GHz radio system with digital steering servo, 5-cell, 1300mAh receiver pack and 110V wall charger
  • SuperTigre G-27CX .27 engine, with recoil starter, polished tuned pipe, glow plug and 3-year limited warranty.
  • Countersunk, hard-anodized 3.25mm aluminum chassis
  • Grey-anodized aluminum parts include threaded Big Bore shocks, drag link plate, front and rear shock towers and front hinge pin plate
  • Hardened steel driveshaft and gears
  • 3.5 mm shock shafts
  • 4 mm shock towers
  • 4.5 mm tie-rod turnbuckles
  • 5 mm camber turnbuckles
  • Droop screws front and rear
  • Installed front and rear sway bars
  • Hex head hardware throughout
  • Fuel tank with a race-inspired “ring-pull” lid
  • A high-downforce wing
  • Mounted racing tires with foam inserts and 17 mm hex hubs
  • Body in four sizzling trim schemes

Specifications:

Length: 19.9 in (505 mm)
Width: 11.9 in (302 mm)
Height: 7.5 in (190 mm)
Wheelbase: 12.8 in (325 mm)
Weight: 7.9 lb (3565 g)

The 835B will be available early July.

DTXD72BB 1/8 835B Buggy .27 2.4GHz RTR Blue $349.99
DTXD72NN 1/8 835B Buggy .27 2.4GHz RTR Orange $349.99
DTXD72RR 1/8 835B Buggy .27 2.4GHz RTR Red $349.99
DTXD72YY 1/8 835B Buggy .27 2.4GHz RTR Yellow $349.99

Gallery > Duratrax RTR 835B 1/8 Nitro 4WD Buggy

Tags:

If you like this article, check out this additional article on Duratrax.

Featured News, Nitro

About the author

Bringing you RC product news you can use on a daily basis as Car Action's Online News Editor. I have over 15 years of RC experience, plus a background in print and broadcast journalism, engineering, information technology, direct marketing, and even banking. Currently I enjoy racing 1/10 electric off-road, and have been bitten by the short course bug.
No Responses to “Duratrax RTR 835B 1/8 Nitro 4WD Buggy”
Copyright © 2014 Air Age Media. All rights reserved.