Axial May Releases

May 24, 2012 No Comments by

Axial has released a ton of option parts for their EXO Terra Buggy and more. Check them all out in the press release below:

EXO™ 67-90mm Shock Set (2pcs)

Axial’s signature high quality aluminum shock sets are now available for the front of your EXO Terra Buggy. Add these precision machined beauties for some style and a little extra strength to your buggies suspension. With the smoothest action possible, these will surely help you tune the suspension for maximum performance!

Looking to upgrade the stock rear plastic shocks, use part number AX30092 72-103mm Shock Set to get that same silky smooth feel on the back of your EXO.

• Hard anodized aluminum shock body
• Threaded for easy pre-load adjustment
• Full range of shocks springs available
• Direct replacement for stock plastic shocks
• Includes all parts needed to build two complete front shocks
• Assembly and shock oil required
• Laser etched logos

AX30091 EXO™ 67-90mm Shock Set (2pcs)
MSRP $50.00

Related Parts

AX30119 Aluminum Shock Body 12×41.5mm (2pcs)
MSRP $20.00

AX30110 Axial Aluminum 13mm Aluminum Preload Collar (2pcs)
MSRP $13.50

AX30111 Axial Aluminum Shock Cap (2pcs)
MSRP $16.00

AX30438 Axial Poly Glycol CH2O 10mm Machined Piston – 1.2 (4pcs)
MSRP $15.00

EXO™ Front Universal Joint Axle Set (2pcs)

Axial’s new Front EXO CVD’s will help your motor deliver all of its power to the wheels and tires smoothly and as efficiently as possible. Less backlash than standard dogbone set-ups means smoother power transfer at all times, especially while cornering at high speeds. A must have for any serious EXO pilot looking to get maximum performance.

• Hardened steel main universal shaft
• Hardened steel outdrives
• Direct replacement for stock front dogbones
• Beefy 2mm cross pins
• No set screws needed, cross pin held in place by inner bearing
• Includes everything needed to build a complete set of two front CVD’s
• Easy install
• Laser etched logos and lengths for easy identification

AX30415 EXO™ Front Universal Joint Axle Set (2pcs)
MSRP $55.00

Related Parts

AX30707 EXO™ Universal Joint CVD Spacer (Front or Rear) (2pcs)
MSRP $6.00

AX30866 EXO™ Universal Joint Axle Shaft 12×33.5 Replacement (2pcs)
MSRP $15.00

AX30867 EXO™ Universal Joint Axle Shaft 7x96mm Replacement (2pcs)
MSRP $25.00

EXO™ Rear Universal Joint Axle Set (2pcs)

Axial’s new Rear EXO™ CVD’s will help your motor deliver all of its power to the wheels and tires smoothly and as efficiently as possible. Less backlash than standard dogbone set-ups means smoother power transfer at all times. A must have for any serious EXO pilot looking to get maximum performance.

• Hardened steel main universal shaft
• Hardened steel outdrives
• Direct replacement for stock rear dogbones
• Beefy 2mm cross pins
• No set screws needed, cross pin held in place by inner bearing
• Includes everything needed to build a complete set of two rear CVD’s
• Easy install
• Laser etched logos and lengths for easy identification

AX30417 EXO™ Rear Universal Joint Axle Set (2pcs)
MSRP $55.00

Related Parts

AX30707 EXO™ Universal Joint CVD Spacer (Front or Rear) (2pcs)
MSRP $6.00

AX30866 EXO™ Universal Joint Axle Shaft 12×33.5 Replacement (2pcs)
MSRP $15.00

AX30868 EXO™ Universal Joint Axle Shaft 7x94mm Replacement (2pcs)
MSRP $25.00

EXO™ Universal Joint Rebuild Set (Front or Rear) (2pcs)

Axial’s EXO™ CVD rebuild kits include new pivot pins to rebuild worn out CVD’s.

• Includes new 2mm cross pins and pivot points

AX30810 EXO™ Universal Joint Rebuild Set (Front or Rear) (2pcs)
MSRP $6.00

EXO™ Heavy Duty 32P Steel Spur Gears

If you plan to put some serious horsepower to the ground with your EXO, we have just the part for you. These precision machined for high quality steel 32 pitch spur gears are ready to accept the challenge and can handle any amount of motor you can install in your EXO. For that extra piece of mind and durability, Axial’s new steel spur gears are up to the task.

• CNC machined from steel for precision and strength
• Hard Anodized for durability
• Direct replacement for stock EXO spur gears
• 32 pitch for durability
• Available in 48T, 50T, 52T and 54T for numerous final drive ratio choices
• Laser etched logo and tooth count

AX30851 Steel Spur Gear 32P 48T
MSRP $25.00

AX30852 Steel Spur Gear 32P 50T
MSRP $25.00

AX30853 Steel Spur Gear 32P 52T
MSRP $25.00

AX30854 Steel Spur Gear 32P 54T
MSRP $25.00

Axial 32P Steel Pinion Gears

Axial’s new steel 32p pinion gears for the EXO Terra Buggy offer you an array of gearing options to fine tune torque and top speed.

• Powder steel construction for durability
• Includes 2 set screws per package
• Compatible with 32P spur gears
• Stamped tooth count for easy identification
• Available for both 3mm and 5mm motor shafts

3mm Shaft

AX30722 Pinion Gear 32P 11T (3mm shaft)
MSRP $6.00

AX30723 Pinion Gear 32P 12T (3mm shaft)
MSRP $6.00

AX30724 Pinion Gear 32P 13T (3mm shaft)
MSRP $6.00

AX30725 Pinion Gear 32P 14T (3mm shaft)
MSRP $6.00

AX30726 Pinion Gear 32P 15T (3mm shaft)
MSRP $6.00

AX30727 Pinion Gear 32P 16T (3mm shaft)
MSRP $6.00

AX30728 Pinion Gear 32P 17T (3mm shaft)
MSRP $6.00

5mm Shaft

AX30837 Pinion Gear 32P 11T (5mm shaft)
MSRP $6.00

AX30838 Pinion Gear 32P 12T (5mm shaft)
MSRP $6.00

AX30839 Pinion Gear 32P 13T (5mm shaft)
MSRP $6.00

AX30840 Pinion Gear 32P 14T (5mm shaft)
MSRP $6.00

AX30841 Pinion Gear 32P 15T (5mm shaft)
MSRP $6.00

AX30842 Pinion Gear 32P 16T (5mm shaft)
MSRP $6.00

AX30843 Pinion Gear 32P 17T (5mm shaft)
MSRP $6.00

EXO™ Machined Aluminum Front Shock Tower (Hard Anodized)

If you are looking for precision chassis and suspension tuning, this billet aluminum front shock tower should be on top of your list. Add some strength to the chassis while retaining the ability to tune the suspension geometry with many combinations. if performance and durability is priority, this shock tower is a must have!

• CNC Machined for precision
• Hard anodized for durability
• Direct replacement for stock front shock tower
• Multiple upper link adjustment holes
• Multiple upper shock mounting holes
• Includes two M3 flathead screws and spacers for upper shock mounts
• Easy install
• Laser etched logos

AX30825 EXO™ Machined Aluminum Front Shock Tower (Hard Anodized)
MSRP $35.00

EXO™ Machined Aluminum Rear Camber Tower (Hard Anodized)

If you are looking to add some strength and rigidity to your EXO Terra Buggy suspension components, this billet aluminum rear camber tower will help you precision tune your suspension for maximum performance!

• CNC Machined for precision
• Hard anodized for durability
• Direct replacement for stock rear camber tower
• Multiple upper link adjustment holes
• Includes four M3 flathead screws
• Easy install
• Laser etched logos

AX30826 EXO™ Machined Aluminum Rear Camber Tower (Hard Anodized)
MSRP $35.00

EXO™ Machined Aluminum Steering Rack (Hard Anodized)

Axial’s machined aluminum steering rack is the perfect blend of light weight and strength. Machined to exacting tolerances for a perfect fit and precise steering performance.

• CNC Machined for precision
• Hard anodized for durability
• Direct replacement for stock steering rack
• Laser etched logos

AX30815 EXO™ Machined Aluminum Steering Rack (Hard Anodized)
MSRP $25.00

EXO™ Machined Aluminum Toe Blocks

Axial’s new machined EXO toe blocks are designed with one thing in mind…strength. Machined from 6mm thick billet aluminum to maintain exacting tolerances for a perfect fit. If you spend as much time in the air as you do on the ground with your EXO, these are the option part for you!

• CNC machined for precision
• Hard anodized for durability
• 6mm thick for strength
• Direct replacement for stock toe blocks
• Laser etched logos for easy identification
• Utilizes the AX80100 Toe inserts included with your EXO

AX30811 EXO™ Machined Aluminum Front Toe Block F1 (Hard Anodized)
MSRP $20.00

AX30812 EXO™ Machined Aluminum Front Toe Block F2 (Hard Anodized)
MSRP $20.00

AX30813 EXO™ Machined Aluminum Rear Toe Block R1 (Hard Anodized)
MSRP $20.00

AX30814 EXO™ Machined Aluminum Rear Toe Block R2 (Hard Anodized)
MSRP $20.00

AX30860 Machined Motor Plate (Hard Anodized)

Axial’s new heavy duty motor plate is for any vehicle running our AX10 transmission. CNC machined from 4.5mm thick billet aluminum, with integrated heatsink fins to help motors run cooler on those all day expeditions. A must have for any R/C overland adventurist!

• CNC Machined for precision
• Hard anodized for durability
• Direct replacement for stock AX10, SCX10 and Wraith motor plates
• Machined fins help dissipate heat from motor for cooler running temperatures
• Includes two cap head screws and heavy duty machined aluminum washers

AX30860 Machined Motor Plate (Hard Anodized)
MSRP $35.00

Cap Head Washer M3x10mm (4pcs)

Axial’s new machined cap head washers are designed for motor mount screws. Perfect for big power applications when maintaining gear mesh is critical. These washers will also prevent motor mount screws from digging into your motor plate and scratching the finish.

• CNC Machined for precision
• Hard anodized for durability
• Compatible with Axial transmissions
• Four washers per package

AXA1076 Cap Head Washer M3x10mm (4pcs)
MSRP $7.00

Gallery > Axial May 2012 Releases

Tags:

If you like this article, check out this additional article on Axial.

Featured News, Rock Crawling

About the author

Bringing you RC product news you can use on a daily basis as Car Action's Online News Editor. I have over 15 years of RC experience, plus a background in print and broadcast journalism, engineering, information technology, direct marketing, and even banking. Currently I enjoy racing 1/10 electric off-road, and have been bitten by the short course bug.
No Responses to “Axial May Releases”
Copyright © 2014 Air Age Media. All rights reserved.