RPM Rear Skid Plate For The Losi TEN-SCTE, TEN-T And 810

RPM Rear Skid Plate For The Losi TEN-SCTE, TEN-T And 810

Earlier RPM released a front bumper and skid plate for the Losi TEN-SCTE, and today they have announced that they now offer a rear skid plate for the Losi TEN-SCTE, TEN-T, and 810. Check our the press release below for more info:

Protection is the key to survivability. Sadly, the aluminum chassis plate of the Losi Ten SCTE, Ten-T or 810 is completely unprotected against scrapes, scratches and impacts at either end of the truck. Our recent release of our #73042 Front Bumper & Skid Plate takes care of the front of the chassis while our #73082 rear Skid Plate was designed to take care of protecting the back.

The RPM Rear Skid Plate for the Losi Ten SCTE, Ten-T & 810 is simple, yet cleverly designed with a sharp leading edge that transitions seamlessly through a large front radius and into a 5/32” thick skid / wear plate. The large front radius prevents objects from catching the front lip of the skid plate, allowing smooth transitions up and over anything sliding against the bottom of the vehicle. RPM nylons are integral to the design, providing unmatched abrasion and skid resistance for longevity and durability.

Don’t rely on a bare aluminum chassis as your rear skid plate. RPM is in the business to protect your ride so bolt us on and never look back!

#73082 – Rear Skid Plate for the Losi Ten SCTE, Ten-T & 810 – $7.95

RC Car Action - RC Cars & Trucks | RPM Rear Skid Plate For The Losi TEN-SCTE, TEN-T And 810

If you like this article, check out this additional article on RPM.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: March 27, 2012 — 3:15 PM
Air Age Media ©