Team Associated SC10 4×4 Factory Team Kit

Team Associated SC10 4×4 Factory Team Kit

This new kit is packed with tons of factory goodies like a VTS4 slipper, 13mm hard anodized aluminum big-bore threaded shocks, centralized-mass battery mount with a carbon fiber strap, Factory Team blue aluminum clamping wheel hex adapters, and much, much more. Check out the press release below for all the info:

Starting with the already awesome SC10 4×4, Team Associated takes our 4WD short course truck to the next level with the full Factory Team treatment! The new high performance features found on the SC10 4×4 Factory Team kit have been designed to give this truck the competitive edge in the dirt and on the track.

The SC10 4×4 Factory Team kit is built from the same race proven composite modular chassis but with many new upgraded features added. The chassis layout has been reconfigured and now features a centralized-mass battery mount. This allows the use of a saddle pack battery (Reedy #627) to optimize the weight distribution of the chassis. With the addition of the Factory Team carbon fiber chassis brace rod, the chassis flex has been made more consistent and predictable for an overall improvement in handling and traction.

One of the more radical features on the SC10 4×4 Factory Team kit is the VTS4 slipper clutch, a variable torque, multi-plate slipper clutch with 4-drive surfaces. The VTS4 slipper clutch is a big step up in performance by providing increased torque capacity in addition to finer resolution in adjustment. This all adds up to more consistent power transfer to the ground.

The SC10 4×4 Factory Team Kit has also received the upgrades you would come to expect to find in full blown race car. You’ll find Factory Team 13mm hard anodized aluminum big-bore threaded shocks, blue aluminum clamping wheel hexes and sway bar sets already in the box!

Features:

  • VTS4 slipper (variable torque, multi-plate slipper with 4 drive surfaces)
  • 13mm hard anodized aluminum big-bore threaded shocks with low friction seals
  • Factory Team TiN coated shock shafts and inner hinge pins
  • Centralized-mass battery mount with carbon fiber strap
  • Factory Team carbon fiber chassis brace rod
  • Improved steering rack with new Ackerman settings
  • Factory Team blue aluminum clamping wheel hex adapters
  • Factory Team front and rear sway bar sets included
  • Factory Team blue titanium heavy-duty turnbuckle set
  • CVA drives with 6mm heavy duty axles and captured pins
  • Factory Team light weight differential outdrives
  • Factory Team blue aluminum metric screw set
  • SC10 Contender body (clear)

Specifications:

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: 550mm (21.65in)
Width: 293mm (11.54in)
Wheelbase: 327mm (12.87in)
Weight: 2750g (6.06 lbs)
Internal Gear Ratio: 2.57
Drive: 4WD

* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.

Required to Complete:

  • R/C 2-channel surface frequency radio system
  • Battery pack (6 cell NiMh or 2 cell LiPo)
  • Battery charger (peak detection charger recommended)
  • Electronic speed control
  • R/C electric motor (550 size recommended)
  • Steering servo
  • Pinion gear
  • Tires
  • Tire glue
  • Paint for body

90010 — SC10 4×4 Factory Team Kit

[nggallery id=631]

If you like this article, check out this additional article on Team Associated.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 4:44 PM
Air Age Media ©