JConcepts Gear: RC8.2e Punisher Body, 12mm Hex Mono Wheels And Blue Aluminum Adapters

JConcepts Gear: RC8.2e Punisher Body, 12mm Hex Mono Wheels And Blue Aluminum Adapters

JConcepts has released a ton of new gear including blue aluminum 12mm hex front adapters for the Team Associated SC10 and B4.1 and rear adapters for the Team Associated B44.1 and B4.1. Check it all out in the press release below:

Factory Team RC8.2e Illuzion Punisher body

The Punisher body by JConcepts for the Associated RC8.2e FT is the meanest, nastiest thing out for 1/8th buggy racing. Throw everything you know out the window, the Punisher separates itself from the rest of the bodies on the market with its distinctive styling.

The radical new Punisher body stares you down like a trained fighter. The slight cab-forward treatment is amongst the most aggressive in class giving the Punisher top notch performance. The RC8.2e features a slightly longer chassis and the Punisher body is a drop-fit for this updated version of the championship winning buggy. Blended wing / body design gives additional down-force to the side-pods and windshield which increases drivability, corner speed and jump control. The rear base of the cab area represents the latest offering for 1/8th buggy racing featuring a super low profile design for increased engine cooling, air flow and escape.

Features:

  • Original – JConcepts Punisher design
  • Extended rear length, drop-on fit for RC8.2e
  • Blended wing / body design
  • Clear polycarbonate with protective film
  • Window masks and decal sheet

Illuzion – RC8.2e FT – Punisher body
Part # – 0224
Retail price – $29.00
(fits Team Associated RC8.2e FT 1/8th buggy)

RC Car Action - RC Cars & Trucks | JConcepts Gear: RC8.2e Punisher Body, 12mm Hex Mono Wheels And Blue Aluminum Adapters

 

 

 

 

 

 

 

 

 

Mono wheels for the TLR 22 buggy

Hardcore racers can now breathe a sigh of relief, JConcepts now has Mono wheels for the TLR 22 buggy. The 22 buggy from TLR racing has been an immediate hit on and off the race track and JConcepts is quick to release direct fit wheels specifically for this new buggy. JConcepts replacement wheels are designed in the popular dish style and available in bright white and fluorescent yellow. When the TLR 22 strikes, JConcepts delivers.

The new Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, flat dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.

Features:

  • Popular dish styling and detail
  • 4 wheels included per package
  • Available in bright white and fluorescent yellow
  • Vent holes
  • Advanced manufacturing process and durable material

Mono – TLR 22 Front wheel (White) – 4pc.
Part # – 3325
Retail price – $11.00
(fits TLR 22 front)

Mono – TLR 22 Front wheel (Yellow) – 4pc.
Part # – 3325Y
Retail price – $11.00
(fits TLR 22 front)

Mono – TLR 22 Rear wheel (White) – 4pc.
Part # – 3326
Retail price – $13.00
(fits TLR 22 rear)

Mono – TLR 22 Rear wheel (Yellow) – 4pc.
Part # – 3326Y
Retail price – $13.00
(fits TLR 22 rear)

RC Car Action - RC Cars & Trucks | JConcepts Gear: RC8.2e Punisher Body, 12mm Hex Mono Wheels And Blue Aluminum Adapters

 

 

 

 

 

 

 

 

 

Mono B4.1 And RB5 12mm hex front wheels

For many years the standard option on the Team Associated 2wd vehicles has been a proven bearing front wheel and pin-drive rear wheel setup. Times have changed, JConcepts – Mono 12mm hex wheels are the latest accessory available for the Team Associated B4.1 buggy. With the recent release of the Team Associated’s 12mm hex conversion, converting to a more durable interchangeable wheel setup is easier than ever. JConcepts replacement wheels are designed in the popular dish style and available in bright white and fluorescent yellow. When Team Associated makes an update, JConcepts delivers.

The new Mono wheels are the maximum size allowed under ROAR rules and make a statement with their large appearance, slight concave dish shaped design and superior inner rib design. The wheels incorporate an outer glue catch that resists excess glue from running down the wheel face during the gluing process. JConcepts wheels are manufactured using advanced techniques to ensure trueness and durability and are branded with the small JC logo for brand identification and authenticity.

To use the 12mm hex wheel on the B4.1 it requires JConcepts part # 2091 clamping hex for the rear and the Team Associated hex conversion for front along with JConcepts part # 2135 clamping front hex.

Mono 12mm hex wheels are a direct bolt-on and correct offset wheel for the Kyosho RB5 line of buggies.

Features:

  • Popular dish styling and detail
  • 4 wheels included per package
  • Available in bright white and fluorescent yellow
  • Vent holes
  • Advanced manufacturing process and durable material
  • Fits Kyosho RB5 as a direct fit
  • Fits B4.1 front, B4.1 / B44.1 rear with adaptors

Mono – B4.1 | RB5 – 12mm hex front wheel (white) – 4pc
Part # – 3347
Retail price – $11.00
(fits B4.1 front with AE hex conversion and JC #2135 clamping front 12mm hex)

Mono – B4.1 | RB5 – 12mm hex front wheel (yellow) – 4pc
Part # – 3347Y
Retail price – $11.00
(fits B4.1 front with AE hex conversion and JC #2135 clamping front 12mm hex)

Mono – B4.1 | B44.1 | RB5 – 12mm hex rear wheel (white) – 4pc
Part # – 3348
Retail price – $13.00
(fits B4.1 / B44.1 rear with JC #2091 12mm clamping rear hex)

Mono – B4.1 | B44.1 | RB5 – 12mm hex rear wheel (yellow) – 4pc
Part # – 3348Y
Retail price – $13.00
(fits B4.1 / B44.1 rear with JC #2091 12mm clamping rear hex)

RC Car Action - RC Cars & Trucks | JConcepts Gear: RC8.2e Punisher Body, 12mm Hex Mono Wheels And Blue Aluminum Adapters
 

 

 

 

 

 

 

 

 

12mm front clamping hex adaptor for SC10

Converting the front of the SC10 to a clamping 12mm hex adaptor is simple with the latest release from JConcepts. The hex adaptors are precision machined, blue anodized aluminum and feature a clamping style design that combine durability and functionality. Installation is simple, and tire changes are hassle free.

Clamping adaptors require:

  • Team Associated 12mm hex conversion steering blocks and axles.
  • JConcepts Rulux (3332B) or Hazard +3mm wheels (3344B) for proper mounting, offset and handling characteristics.

Features:

  • Simple, clamping 12mm design and function
  • Durable, aluminum material with blue anodizing
  • Compatible with JConcepts 12mm hex wheels

JConcepts – 12mm front clamping hex adaptor for SC10 – blue anodized aluminum
Part # – 2134
Retail price – $9.00
(Fits SC10 front with the addition of AE 12mm conversion parts or SC10RS direct)

 RC Car Action - RC Cars & Trucks | JConcepts Gear: RC8.2e Punisher Body, 12mm Hex Mono Wheels And Blue Aluminum Adapters

 

 

 

 

 

 

 

 

 

12mm front clamping hex adaptor for B4.1

Converting the front of the B4.1 to a clamping 12mm hex adaptor is simple with the latest release from JConcepts. The hex adaptors are precision machined, blue anodized aluminum and feature a clamping style design that combine durability and functionality. Installation is simple, and tire changes are hassle free.

Clamping adaptors require:

  • Team Associated 12mm hex conversion steering blocks and axles.
  • Adaptors require JConcepts Inverse wheels #3337 (white) #3337Y (yellow) or Mono wheels 3347 (white) 3347Y (yellow) wheel for proper mounting, offset and handling characteristics.

Features:

  • Simple, clamping 12mm design and function
  • Durable, aluminum material with blue anodizing
  • Compatible with JConcepts 12mm hex and Kyosho RB5 front wheels

JConcepts – 12mm front clamping hex adaptor for B4.1 – blue anodized aluminum
Part # – 2135
Retail price – $9.00
(Fits B4.1 front with the addition of AE 12mm conversion parts)

RC Car Action - RC Cars & Trucks | JConcepts Gear: RC8.2e Punisher Body, 12mm Hex Mono Wheels And Blue Aluminum Adapters

 

 

 

 

 

 

 

 

 

12mm rear hex adaptor for B4.1, B44.1

Converting the rear of the B4.1 or B44.1 to 12mm hex drive is simple with the release of the rear hex adaptor set from JConcepts. The hex adaptors are precision machined, blue anodized aluminum and feature a clamping style design that combine durability and functionality. Installation is simple and converts the rear of the B4.1 to the more popular 12mm design.

Adaptors require JConcepts Inverse wheels #3338 (white) #3338Y (yellow) or Mono wheels 3348 (white) 3348Y (yellow) wheel for proper mounting, offset and handling characteristics.

Features:

  • Simple, clamping 12mm design and function
  • Durable, aluminum material with blue anodizing
  • Compatible with Kyosho RB5 and TLR 22 rear wheels

JConcepts – 12mm rear hex adaptor for B4.1, B44.1 – blue anodized aluminum
Part # – 2091
Retail price – $9.00
(Fits B4.1 and B44.1 rear axle and requires 12mm hex wheel)

[nggallery id=545]

If you like this article, check out this additional article on JConcepts.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 4:47 PM
Air Age Media ©