Pro-Line BullDog Body For The +8mm Team Associated B4.1 Chassis

Pro-Line BullDog Body For The +8mm Team Associated B4.1 Chassis

Ryan Cavalieri used this new body with the extended +8mm chassis for his B4.1 to capture the 2011 IFMAR 2WD Worlds title, and now you too can own this body. Check out all the info in the press release below:

This is the Pro-Line BullDog Clear Body, and is intended for use with the Team Associated +8mm B4.1 1:10 off-road buggy. It all started when Team drivers Ryan Cavalieri, Travis Amezcua and Ty Tessmann put their heads together with the Pro-Line development team with a mission to develop bodies with class leading performance in the 1:8th ranks. This aggressive goal was achieved with the BullDog body line. Providing performance that has, at times, been deemed an unfair advantage. BullDog bodies now set the standard in performance. After achieving such impressive results, Pro-Line is now bringing BullDog cab forward technology to the 1:10 class.

Please note: All bodies are sold in crystal clear lexan and are painted for advertising purposes only.

Features:

  • Advanced cab forward design generates unmatched off-power steering
  • Low profile rear deck feeds wing with clean air flow
  • Made from durable / genuine Lexan®
  • Super-low styling giving your +8mm B4.1 the lowest center of gravity (CG) possible
  • Fabricated to fit snugly around each chassis component
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new BullDog onto your B4.1

  • Made in the USA, since 1982

What’s Included:

  • Clear BullDog Body (1pc)
  • Rear Wing (1pc)
  • Decal sheet (1pc)
  • Window mask (1pc)

Fits:

  • Team Associated +8mm B4.1

3368-00 | BullDog Clear Body for +8mm B4.1 $28.95

[nggallery id=491]

If you like this article, check out this additional article on Pro-Line.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 4:52 PM
Air Age Media ©