Kyosho Blizzard SR Ready Set

Sep 21, 2011 4 Comments by

Have fun in the snow this Winter with the Kyosho Blizzard SR.  Check out the press release below for all the details: 

The Blizzard SR is based on a completely revised version of the popular Blizzard chassis. The SR is a pre-assembled model with a two motor setup. Powerful 380 motors transmit their power to drive the transmission block, each motor drives on track. Performance has been enhanced with a dual ESC and motor setup, powered by 2 380 size high torque motors giving you the power to climb, push and power over just about anything. This simple and efficient setup allows for more realistic and complex movements. A 3rd channel controls the all new snow plow that is included with the SR as standard equipment. A true fun vehicle for all types, skill levels and all types of terrains.

Features:

  • New ESC: Newly developed high spec ESC units and lipo compatible.
  • Inner Cover: Dust and snow proof chassis design with inner covers covering all critical areas like gears, motors and ESC’s. *Not water proof!
  • KS101BK : The Blizzard SR is equipped with a reliable KS101BK servo for the front plow.
  • 380 : Two 380 size motors are pre-installed for easy control and high torque output.
  • Secured Battery : Two Velcro straps secured the battery to the tray allowing for most stick type/size batteries to be used. Like 7.2/7.4v Lipo or NiMh)
  • Realistic : Two realistic tracks are on either side of the Blizzard SR, these track give you the freedom to run on, over and though anything with ease.
  • Ready Set : The Blizzard SR is a fully assembled kit right out of the box with little to no prep time.
  • 2.4Ghz Ready : The New KT-21 2.4Ghz Transmitter gives you the advantage an freedom to run when and where you want with no worries.

Contents:

  • Pre-Assembled Chassis
  • Pre-Painted Body
  • Two Pre Installed Motor and ESC set
  • Kyosho Perfex KT-21 2.4Ghz 2 Stick Transmitter
  • Manual Booklet

What is a Ready Set:

A Readyset is a fully assembled model that includes nearly everything you need to run. Body color scheme is complete so only consumables like batteries and a 7.4v Lipo or 7.2v NiMh is required so you can start operating the model without delay.

Required For Operation:

  • 8x AA-Size Batteries
  • 7.2v NiMh 6cell Stick Pack or 7.4v Lipo (3300mah or higher) with tamiya plugs
  • Proper Charger for proper type of battery

Available: November 2011

30986B – $413.99

Gallery > Kyosho RTR Blizzard SR

Tags:
Featured News, Product News

About the author

Bringing you RC product news you can use on a daily basis as Car Action's Online News Editor. I have over 15 years of RC experience, plus a background in print and broadcast journalism, engineering, information technology, direct marketing, and even banking. Currently I enjoy racing 1/10 electric off-road, and have been bitten by the short course bug.

4 Responses to “Kyosho Blizzard SR Ready Set”

  1. Leif says:

    Any word of a kit? That would be fun to build.

    • Matthew Higgins says:

      I believe there has been a kit version for years. The Blizzard has been around for a long time–nitro and electric–and while I’ve never had one, I believe the older versions were kits.

  2. Eye of the Storm says:

    Thank you for any other excellent article. The place else may anybody get that type of information in such a perfect approach of writing? I’ve a presentation subsequent week, and I am on the look for such information.

  3. diablo 3, diablo 3 forum, diablo, diablo3life, diablo3 says:

    Very great post. I just stumbled upon your blog and wanted to say that I have truly enjoyed browsing your weblog posts. In any case I will be subscribing to your rss feed and I am hoping you write once more very soon!

Copyright © 2014 Air Age Media. All rights reserved.