New option parts for the Team Durango DNX408 have been released to tune performance and make your ‘408 stand out from the crowd.
Aluminium Turnbuckles
These aluminium turnbuckles offer lower weight when compared to the standard steel part. Anodized gold they also add style to your model. When fitted to the DNX408 model these aluminium turnbuckles offer a massive 62% weight saving over the original steel components.
Original steel turnbuckles – complete set of 10, 51.8g
Optional aluminium upgrade turnbuckles – full set of 10 (see below), 19.7g
Available in several lengths to replace the standard turnbuckles on your DNX408.
TD290013 TURNBUCKLE SET FOR THROTTLE AND STEERING SERVO (4pcs)
TD310214 TURNBUCKLE M5×64mm ALUMINIUM (2pcs)
TD310215 TURNBUCKLE M5×60mm ALUMINIUM (2pcs)
TD310216 TURNBUCKLE M5×48mm ALUMINIUM (2pcs)
Fuel Tank Lid Puller Set
The Fuel Tank Lid Puller Set is designed to improve access to the fuel tank during a pit stop. This part fits to the lid on your fuel tank and allows quick and easy opening of the fuel tank ensuring quick and trouble free pit stops.
This part contains 4 pullers plus the screws required to mount the puller to your fuel tank.
TD290011 FUEL TANK LID PULLER SET (4pcs)
Clutch Springs
Team Durango clutch springs are available in different thicknesses allowing you to tune your clutch.
The clutch springs are sold in sets of three and are available in the following thicknesses.
TD310159 CLUTCH SPRING 1.0mm (3pcs)
TD310236 CLUTCH SPRING 0.9mm (3pcs)
TD310270 CLUTCH SPRING 0.8mm (3pcs)
TD310271 CLUTCH SPRING 0.7mm (3pcs)
Vented Shock Caps
The vented shock cap allows air to move in and out of the area above the shock diaphragm. This offers more consistent damping, especially on rough terrain.
These should be used with a foam compensator which is placed above the diaphragm before installing the shock cap.
TD330300 VENTED SHOCK CAP (1pc)
Aluminium Pivot Balls (2pcs)
These aluminium pivot balls offer lower weight when compared to the standard steel part.
When fitted to the DNX408 model these aluminium pivot balls offer a 60% weight saving on this component – 1.2g (pair) – original steel parts 3.0g (pair).
Supplied in pairs.
TD330182 PIVOT BALL A-TYPE ALUMINIUM (2pcs)
Aluminium Suspension Arm Bushing (4pcs)
These aluminium suspension arm bushings offer lower weight when compared to the standard steel parts. When fitted to the DNX408 model these suspension arm bushings offer a 69% weight saving on this component – 1.7g (4) – original steel parts 5.4g (4).
Supplied in a pack of 4.
TD340026 Aluminium Suspension Arm Bushing (4pcs)
[nggallery id=406]