Novak 5-Amp Universal 2S BEC For Heavy Duty Servos

Novak 5-Amp Universal 2S BEC For Heavy Duty Servos

Team Novak re-introduces its popular 5-Amp Universal BEC (#5465). Optimized for 2-cell LiPo battery applications, this module is vital for use with brushed or brushless ESCs that don’t have a strong internal BEC to operate heavy-duty servos used in today’s rugged crawlers, 4WD Short Course Trucks, and other off-road and on-road vehicles, boats, airplane or nitro applications. Novak’s BEC Module allows the servos to operate at their optimum levels, prevent servo damage, and extend run times.

Does your servo cut out or feel weak? Does your radio system quit under load? Your ESC’s internal BEC may be straining and losing power. Novak’s small and compact 5-Amp BEC module is easy to fit into any vehicle, and will regulate the power to the receiver and servos to a consistent 6 volts and 5 amps. This circuitry is the same ultra-strong 5-amp BEC circuitry that is used in many of Novak’s ESCs. The BEC module is equipped with an On/Off switch and a bright blue LED to indicate when the power is on. Heavy-duty 20 gauge silicone wire connects the BEC to the power source while a standard universal JST receiver plug delivers the power to the receiver’s battery slot.

The new 5A Universal BEC Module will be available in July 2011.

NOVAK’S 5A BEC MODULE SPECS (#5465)

Size ………………………………….. 0.66” x 1.00” (16.8 x 25.4 mm)
Weight ……………………………….. 0.45 oz (12.7 g)
Input Cells ………………………….. 2S LiPo / 4-6 cell NiMH/NiCd
BEC …………………………………… 6 Volts, 5 Amps
Switch ……………………………….. Yes
Input Harness …………………….. JST- Universal
Power Wire ………………………… 20G Red & Black
LED …………………………………… Blue (on-board)

#5465 5A Universal BEC (2S)

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 20, 2015 — 5:27 PM
Air Age Media ©