Pro-Line Mid May Releases

May 18, 2011 1 Comment by

BullDog Clear Body (Rear Motor Configuration) BullDog Clear Body (Rear Motor Configuration)

This is a BullDog Rear Motor Configuration Clear Body for the Losi 22 1:10 Buggy. Pro-Line is proud to introduce the first No-Compromise racing body for the Losi 22 buggy in the rear motor configuration. To date, all of the bodies made for this car have sacrificed looks and performance due to the dual motor configuration. If you race primarily in the rear motor configuration, Pro-Line’s new BullDog for the Losi 22 is THE ONLY body to have. On and off the track you will appreciate Pro-Line’s No-Compromise approach. The advanced aerodynamic properties and styling will improve your buggies performance and turn heads. If you want uncompromising performance, you need Pro-Line’s new BullDog Rear Motor Configuration Clear Body for the Losi 22!

NOTE: This body requires the use of Speed Controls measuring at or below 1.6”L x 1.6”W x 0.65”H (40.5mm L x 40.5mm W x 17mm H). Some examples are the Tekin RS, the LRP SXX and the Viper VTX10R. If you have a Novak speed control, you must use the #3359-00 Mid Motor Configuration BullDog body and cut it for either mid or rear motor for proper clearance.

Features:

  • Advanced cab forward design generates unmatched off-power steering
  • Low profile rear deck feeds wing with clean air flow
  • Made from durable / genuine Lexan®
  • Super-low styling giving your Losi 22 the lowest center of gravity (CG) possible
  • Fabricated to fit snugly around each chassis component
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new BullDog onto your 22

  • Made in the USA, since 1982

What’s Included:

  • Clear BullDog Body (1pc)
  • Rear Wing (2pcs)
  • Decal sheet (1pc)
  • Window mask (1pc)

358-00 | BullDog Losi 22 Rear Motor Configuration

BullDog Clear Body (Mid Motor Configuration) for Losi 22 with Mid Motor Configuration

This is a BullDog Mid Motor Configuration Clear Body for the Losi 22 1:10 Buggy. Pro-Line is proud to introduce the first No-Compromise racing body for the Losi 22 buggy in the mid motor configuration. To date, all of the bodies made for this car have sacrificed looks and performance due to the dual motor configuration. If you race primarily in the mid motor configuration (this body can also be cut and used in the rear motor configuration for large speed controls), Pro-Line’s new BullDog for the Losi 22 is THE ONLY body to have. Pro-Line’s new mid motor body features a large scoop to maximize clearance and air flow to your motor and electronics. The advanced aerodynamic properties and cab-forward styling will improve your buggies performance and turn heads. If you want uncompromising performance, you need Pro-Line’s new BullDog Mid Motor Configuration Clear Body for the Losi 22!

NOTE: This body can be cut and used in the rear motor configuration to allow large speed controls measuring above 1.6”L x 1.6”W x 0.65”H (40.5mm L x 40.5mm W x 17mm H). This includes all Novak speed controls.

Features:

  • Advanced cab forward design generates unmatched off-power steering
  • Low profile rear deck feeds wing with clean air flow
  • Made from durable / genuine Lexan®
  • Super-low styling giving your Losi 22 the lowest center of gravity (CG) possible
  • Fabricated to fit snugly around each chassis component
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new BullDog onto your 22

  • Made in the USA, since 1982

What’s Included:

  • Clear BullDog Body (1pc)
  • Rear Wing (2pcs)
  • Decal sheet (1pc)
  • Window mask (1pc)

3359-00 | BullDog Losi 22 Mid Motor Configuration

BullDog Clear Body for Kyosho Lazer ZX-5

This is the Pro-Line BullDog Clear Body for the Kyosho ZX-5 1:10 4WD buggy. Pro-Line has made waves in the RC industry because of the superior handling and aggressive styling of the BullDog line of bodies. Some BullDog bodies have even been considered an unfair advantage due to the huge performance gains. Now Kyosho fans can celebrate because Pro-Line is bringing this race proven technology straight to the ZX-5! This body has been designed specifically to fit the Kyosho buggy chassis and still provides the unmatched performance characteristics that define Pro-Line’s BullDog body line.

Features:

  • Advanced cab forward design generates unmatched off-power steering
  • Low profile rear deck feeds wing with clean air flow
  • Made from durable / genuine Lexan®
  • Fabricated to fit snugly around each chassis component
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new BullDog onto your ZX5

  • Made in the USA, since 1982

What’s Included:

  • Clear BullDog Body (1pc)
  • Rear Wing (2pcs)
  • Decal sheet (1pc)
  • Window mask (1pc)

3356-00 | BullDog ZX-5

Scrubs 2.2″ 4WD Off-Road Buggy Front Tires for 2.2″ 4WD Buggy Front Wheels

This is a pair of Scrubs 2.2” 4WD Off-Road Buggy Front Tires. Stay in the groove with Pro-Line’s all new Scrubs 4WD front buggy tires. Designed specifically for wet/dry clay and hard packed tracks, the Pro-Line Scrubs front tire offers improved steering, handling and forward traction. The Scrubs tire features an angled bar design for tons of side bite, as well as a V-pin design which will make your buggy track straight as an arrow. The new Scrubs are offered in our M3, M4 and MC compounds to meet all your track needs. When thinking about getting a new 4WD front buggy tire, think about Scrubbing past the competition. The same Scrubs technology that is currently dominating indoor/outdoor clay and hard pack tracks on the front of 2WD buggies can now be found on Pro-Line’s new Scrubs 4WD front!

Tire Features:

  • Angled bar design for superior side bite on hard packed conditions
  • Base pin for extraordinary forward bite on hard-packed/blue-groove surfaces
  • Reversible Design
  • Available in M3 (Soft), M4 (Super Soft), and MC (Clay) compounds
  • Cut foam included

What’s Included:

  • Scrubs 2.2″ 4WD Off-Road Buggy Front Tires (2 pcs)
  • Cut foam inserts (2 pcs)

 

SPECS:

Height: 3.32″ (84mm)
Width: 1.32″ (34mm)

8214-02 M3 (Soft)
8214-03 M4 (Super Soft)
8214-17 MC (Clay)

1:10 Off-Road Wings (2 pk) for 1:10 Buggy

This is a 2 pack of Off-Road Wings for 1:10 Buggy. Pro-Line is proud to introduce a brand new 6 ½” high down force wing design to fit on all popular 1:10 off-road 2WD and 4WD buggies. Wings significantly affect how your buggy handles in the air and during high-speed/low-speed sections of the track. This wing features Pro-Line’s Smooth Flow Technology: a deck section on the wing that can be cut out allowing air to flow around effortlessly and reducing drag. Track testing has proven this wing to smooth out the handling of twitchy 1:10 buggies, which results in fewer mistakes and faster lap times. The wing also features styling inspired from Pro-Line’s larger 1:8 off-road nitro buggy wings, which are proven winners on the track. Take the win by getting a pair of new 1:10 wings from Pro-Line!

Features:

  • Popular 6 ½” wide, high down force design
  • Pro-Line’s Smooth Flow Technology – reducing drag
  • Smooth handling characteristics for quick lap times
  • Made with Crystal Clear Genuine GE Lexan®
  • Made in the USA, since 1982

What’s Included:

  • 1:10 Off-Road Buggy Wing (2 pc)

 

6245-00 | 1:10 Off-Road Buggy Wing (2 pk)

 

ProTrac Suspension Kit Renegade 2.2″/3.0″ Red/Black Bead-Loc Wheels for ProTrac Suspension Kit Slash and others (see below)

This is a pair ProTrac™ Suspension Kit Renegade 2.2”/3.0” Red/Black Bead-Loc Wheels. Pro-Line has listened to our fans and is releasing the best-selling bead-loc wheel design in the extremely popular ProTrac™ offset. The ProTrac™ offset has become the new standard in short course racing and now fits several popular SC kits. The wheel features Pro-Line’s new Renegade style wheel face – Tough 10-spoke wheel replicating the latest in high performance full-size pro racing technology. Pro-Line’s Bead-loc technology allows you the ability to take tires on and off at will, making it the most user friendly and economical wheel choice available. Put some Pro-Line ProTrac™ Suspension Kit Renegade 2.2”/3.0” Red/Black Bead-Loc Wheels on your truck today!

Features:

  • 10-spoke wheel design for increased rigidity
  • 3-piece wheel design for easy installation and no gluing of tires
  • Six stainless steel button head screws included per wheel. Button Head Hardware size 2mm hex, 3mm threads, 10mm long
  • Wheel Made out of durable nylon material with Die Cast Bead-Loc ring

NOTE: Pro-Line bead-loc wheels work with Pro-Line tires ONLY due to the inner webbing bead design

Fits:

  1. [F/R] ProTrac™ Slash
  2. [F/R] SC10 (using 12mm adapter kits and Inboard Hubs)
  3. [F/R] SC10 4×4
  4. [F/R] TEN-SCTE 4×4 (with trimming)
  5. [R] XXX-SCT

What’s Included:

  • Renegade Wheels (2 pcs)
  • Bead-Loc Sleeves (2 pcs)
  • Die Cast Bead-Loc Rings (2 pcs)
  • Stainless Steel Button Head Screws (12 pcs)

2731-03 | ProTrac™ Suspension Kit Renegade 2.2”/3.0” Red/Black Bead-Loc Wheels

Desperado 2.8″ Black Front Nitro Wheels for JATO Front, Nitro Stampede/Rustler Front

This is a pair Desperado 2.8″ Black Front Nitro Wheels. Pro-Line’s highly anticipated new 6-spoke wheel will make your truck the toughest looking one on the block. The wheel is a one-piece glue wheel made out of extremely durable nylon material and features a molded in bead-loc ring for an awesome scale look. This wheel will accept all Pro-Line 2.8” Traxxas® Style Bead tires along with all Traxxas® 2.8” tires, giving you a ton of rubber options. Make your truck stand out from the rest and get some Pro-Line Desperado 2.8” wheels today!

Features:

  • Aggressive 6-spoke wheel design
  • Molded in Bead-loc ring for scale look
  • Works with all 2.8″ Traxxas® Style Bead tires
  • Made out of durable nylon material
  • Requires the use of 11mm x 5mm x 4mm ball bearings to be installed into the bearing pocket on the wheel (NOT INCLUDED)
  • Made in the USA, since 1982

Fits:

  • [F] JATO®
  • [F] Nitro Stampede®
  • [F] Nitro Rustler®

What’s Included:

  • Desperado 2.8″ Traxxas® Style Bead Black Front Nitro Wheels (2)

2728-03 | Desperado 2.8″ Traxxas® Style Bead Black Front Nitro Wheels

Desperado 2.8″ Black Wheels for JATO Rear, Nitro Stampede/Rustler Rear, Electric Stampede/Rustler Front or Stampede 4X4 F/R

This is a pair Desperado 2.8″ Black Wheels. Pro-Line’s highly anticipated new 6-spoke wheel will make your truck the toughest looking one on the block. The wheel is a one-piece glue wheel made out of extremely durable nylon material and features a molded in bead-loc ring for an awesome scale look. This wheel will accept all Pro-Line 2.8″ Traxxas® Style Bead tires along with all Traxxas® 2.8″ tires, giving you a ton of rubber options. This is a 12mm hex wheel. Make your truck stand out from the rest and get some Pro-Line Desperado 2.8” wheels today!

Features:

  • Aggressive 6-spoke wheel design
  • Molded in Bead-loc ring for scale look
  • Works with all 2.8″ Traxxas® Style Bead tires
  • Made out of durable nylon material
  • Made in the USA, since 1982

Fits:

  • [R] JATO®
  • [R] Nitro Stampede®
  • [R] Nitro Rustler®
  • [F] Electric Stampede®
  • [F] Electric Rustler®
  • [F/R] Stampede® 4×4

What’s Included:

  • Desperado 2.8″ Traxxas® Style Bead Black Wheels (2)

2729-03 | Desperado 2.8″ Traxxas® Style Bead Black Wheels

Desperado 2.8″ Black Rear Electric Wheels for Electric Stampede/Rustler Rear

This is a pair Desperado 2.8” Black Wheels. Pro-Line’s highly anticipated new 6-spoke wheel will make your truck the toughest looking one on the block. The wheel is a one-piece glue wheel made out of extremely durable nylon material and features a molded in bead-loc ring for an awesome scale look. This wheel will accept all of Pro-Line’s new 2.8” Traxxas® Style Bead tires along with all Traxxas® 2.8” tires, giving you a ton of rubber options. This is a 12mm hex wheel. Make your truck stand out from the rest and get some Pro-Line Desperado 2.8” wheels today!

Features:

  • Aggressive 6-spoke wheel design
  • Molded in Bead-loc ring for scale look
  • Works with all 2.8” Traxxas® Style Bead tires
  • Made out of durable nylon material
  • Made in the USA, since 1982

Fits:

  • [R] Electric Stampede®
  • [R] Electric Rustler®

What’s Included:

  • Desperado 2.8″ Traxxas® Style Bead Black Wheels (2)

2730-03 | Desperado 2.8″ Traxxas® Style Bead Black Wheels 

Featured News, Product News

About the author

Bringing you RC product news you can use on a daily basis as Car Action's Online News Editor. I have over 15 years of RC experience, plus a background in print and broadcast journalism, engineering, information technology, direct marketing, and even banking. Currently I enjoy racing 1/10 electric off-road, and have been bitten by the short course bug.

One Response to “Pro-Line Mid May Releases”

  1. Down to Earth RC - Pro-Line Mid May Releases says:

    [...] Pro-Line Mid May Releases RC Car Action. [...]

Copyright © 2014 Air Age Media. All rights reserved.