ST Racing Concepts Universals And Light Weight LCG Parts Set For The Traxxas Slash 2WD

ST Racing Concepts Universals And Light Weight LCG Parts Set For The Traxxas Slash 2WD

Carrying over design and material selection from our HPI Blitz and Associated SC10 universal kits, our Slash 2wd universal kits features large diameter universal driveshaft bone for more durability against the power of today’s Lipo battery/Brushless motor combo, the heavier weight of short course truck, and larger diameter of short course truck tires. We also used the same carbon steel material for axles, which features two sets of universal pin holes so you can get twice the life out of the same set of axles. The universal joints and joint pins are of carbon steel material as well and the pins features a “step” for the setscrew to have a flat spot to more securely hold the universal driveshafts together. Lastly, even the universal shaft roll pin at the end was not over looked. Carbon steel at the pin although strong will unfortunately add excessive wear to the diff outdrives, thus a different material was selected just for the shaft pin for durability and ease of wear on the diff outdrives.

ST1953X ST Racing Concepts Slash 2wd Universal Driveshaft kit (w/diff outdrives) $39.99 1 pair

ST1953X-1 ST Racing Concepts Replacement axles for ST1953X universals $14.99 1 pair

ST1953X-2 ST Racing Concepts replacement joint, joint pins and hardwares for ST1953X $4.99

ST1953X-3 ST Racing Concepts Replacement Universal driveshaft bones for ST1953X $16.99 1 pair

ST1953X-4 ST Racing Concepts Replacement Diff outdrives for ST1953X $9.99 1 pair

RC Car Action - RC Cars & Trucks | ST Racing Concepts Universals And Light Weight LCG Parts Set For The Traxxas Slash 2WD

Light Weight Chassis Components for ST5822 Slash 2WD LCG Chassis conversion kit

With the increase popularity of our LCG conversion kit for the Slash 2WD (ST5822), we now introduce carbon fiber and fiberglass light weight chassis components to make the truck even more agile and to allow racers to tune for different weight bias and rear traction needs. We now offer the upper chassis plate in 3.0mm graphite and the lower chassis extension piece in 3.5mm fiberglass. Combine use of the two parts will save over 17 grams of weight. Also available now are replacement anodized aluminum bottom plates.

ST5822-RB/GM/R/S ST Racing Concepts Slash 2wd Aluminum Replacement bottom chassis plate for ST5822 LCG conversion kit MSRP: $10.99

ST5822-F1 ST Racing Concepts Slash 2wd Light Weight fiberglass bottom chassis extension plate for ST5822 LCG Conversion Kit MSRP: $8.99

ST5822-C1 ST Racing Concepts Slash 2wd Light Weight Carbon Fiber upper chassis extension plate for ST5822 LCG Conversion Kit MSRP: $13.99

ST5822-LW ST Racing Concepts Slash 2wd Light Weight Carbon Fiber upper chassis and lower chassis combo set for ST5822 LCG Conversion Kit MSRP: $20.99

[nggallery id=188]

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 4:48 PM
Air Age Media ©