Pro-Line Releases A Ton Of New Gear: 1/10-scale & Short Course

Jan 17, 2011 No Comments by

Like them or not, these cab forward bodies are here to stay and Pro-Line releases a new cab forward Bulldog body for the Team Associated T4.1.  They have also released a SC10 front inboard hub kit that will allow you to run the same tires both front and back when using Pro-Line’s 12mm hex and ProTrac wheels.

BullDog Clear Body for the T4.1

This is the Pro-Line BullDog T4.1 Clear Body, and is intended for use with the Team Associated T4.1 1:10 Truck. It all started when Team drivers Ryan Cavalieri, Travis Amezcua and Ty Tessmann put their heads together with the Pro-Line development team with a mission to develop bodies with class leading performance in the 1:8th ranks.

This aggressive goal was achieved with the BullDog body line. Providing performance that has, at times, been deemed an unfair advantage. BullDog bodies now set the standard in performance for T4.1 owners. After achieving such impressive results, Pro-Line is now bringing BullDog cab forward technology to the 1:10 class.

Features:

  • Advanced cab forward design generates unmatched off-power steering
  • Low profile rear deck feeds wing with clean air flow
  • Made from durable / genuine Lexan®
  • Super-low styling giving your T4.1 the lowest center of gravity (CG) possible
  • Fabricated to fit snugly around each chassis component
  • Four steps to get your T4.1 Body Race Ready:

1. Clean Body and apply included window mask
2. Paint then peel the over-spray film off
3. Sticker your body (decal sheet included)
4. Mount your new BullDog onto your T4.1

  • Made in the USA

What’s included:

  • Clear Lexan® BullDog T4.1 Truck Body and wing
  • Decal sheet
  • Window masks included
  • Paint-then-peel overspray film included

3349-00 – $24.61

1:10 Truck Closed Cell Insert

1:10 Truck Fans – This is 1:10 Truck Closed Cell Rear Inserts. Choosing the right insert for the right condition can be the difference between winning, losing, or just plain having bragging rights over a competitor on the track. Pro-Line now offers an aftermarket insert for you 1:10th scale truck enthusiasts to use on those tracks that desire a firmer and longer lasting insert set-up.

Want to save money on your favorite hobby? Then choose the Closed Cell inserts because they are water safe and reusable!

Features:

  • Closed Cell Technology
  • No air gaps in between tires unlike other brands
  • Perfectly balanced
  • 100% water safe
  • Reusable
  • Extremely durable
  • Light weight
  • For use on tracks that desire a firmer insert

What’s included:

  • Closed Cell inserts (2 pcs)

6192-01 – $9.31

SC10 Front Inboard Hub for SC10 Front

This is Pro-Line’s SC10 Front Inboard Hub kit. This kit replaces the stock SC10 front hubs and axles and converts it to a floating 12mm hex, so you can run Pro-Line’s ProTrac wheels in the front of your SC10. When combined with Pro-Line’s #6064-05 Rear Hex Adapters for the SC10, you can now run the same Pro-Trac Hex wheel on the front and rear of your truck! This kit is destined to become the must have item for your SC10 because it eliminates front and rear specific wheels for your SC10. Get them now!

Features:

  • Direct replacement for your SC10 front hubs and axles
  • Allows 12mm Hex wheels Pro-Trac offset to be used on the front of your SC10
  • When used with #6064-05 Rear Hex Adapters, this kit allows for the same wheel to be used for the front and rear of your SC10
  • Race tested and approved by Ryan Cavalieri

What’s included:

  • Molded steering knuckles (2)
  • Precision ball bearings (4)
  • Axles (2)
  • Shims (2)
  • Roll pins (2)
  • Axle nuts (2)

6068-0 – $29.95

1:10 Closed Cell 4WD Front Inserts for 2.2″ Buggy 4WD Front Tires

This is 1:10 4WD Front Buggy Closed Cell Inserts. Choosing the right insert for the right condition can be the difference between winning, losing, or just plain having bragging rights over a competitor on the track. Pro-Line now offers an aftermarket insert for you 1:10th scale 4WD buggy enthusiasts to use on those tracks that desire a firmer and longer lasting insert set-up.

Want to save money on your favorite hobby? Then choose the Closed Cell inserts because they are water safe and reusable!

Features:

  • Closed Cell Technology
  • No air gaps in between tires unlike other brands
  • Perfectly balanced
  • 100% water safe
  • Reusable
  • Extremely durable
  • Light weight
  • For use on tracks that desire a firmer insert

What’s included:

  • Closed Cell inserts (2 pcs)

6185-02 – $7.61

Street Fighter SC Tires Mounted on Renegade Black Wheels

Short Course Fans – This is a pair of Pro-Line Street Fighter SC Tires Mounted on Renegade Black Wheels. Looking for the ultimate long wear street tire? Then check out Pro-Line’s Street Fighter SC. Based on the latest in high performance on-road tire technology, the Street Fighter SC has the perfect balance of G force enhancement and style that will keep your truck turning heads.

Combining the Street Fighter with the Renegade, Pro-Line is changing it up with another bold new option for all the Slash® or Biltz owners. The Pro-Line Renegade wheels feature a tough 10 spoke design replicating the latest in high performance full size forged racing wheels used by the pros. The detailed beadloc and lug nut hardware also adds to the realism.

Glued by the Pros here at Pro-Line, the new Street Fighter Premounts also include closed cell inserts for the all-time best street fighting action!

When you are ready to take your Slash® or Biltz to the next level, then check out the Street Fighter Premounts.

Tire Features:

  • Standardized 2.2”/3.0” SC bead dimensions
  • Aggressive long wear tread
  • Made from M2 (Medium) compound

Wheel Features:

  • Lightweight one-piece design
  • 2.2″ outer bead and 3.0″ inner bead
  • Simulated Bead-Loc ring
  • Wheel made from high-strength, durable DuPont nylon material
  • 10 Spoke design for increased rigidity

Foam Features:

  • Matches the contour of the SC tire profile
  • High density, reusable and waterproof
  • Perfectly balanced
  • Extremely durable
  • Light weight
  • Made 100% in the USA

What’s Included:

  • Street Fighter tires mounted on Renegade wheels (2 pcs)
  • Includes Closed Cell Foam Inside (2pcs)

1167-17 Street Fighter SC 2.2″/3.0″ Tires Mounted on Renegade Black Wheels for Slash Rear, Slash 4×4 and Blitz Front or Rear

1167-18 Street Fighter SC 2.2″/3.0″ Tires Mounted on ProTrac Renegade Black Wheels for Slash F/R and SC10 F/R (with 12mm adapter kit and front inboard hub)

Electric, Featured News, Off-road, Product News, Short Course

About the author

Bringing you RC product news you can use on a daily basis as Car Action's Online News Editor. I have over 15 years of RC experience, plus a background in print and broadcast journalism, engineering, information technology, direct marketing, and even banking. Currently I enjoy racing 1/10 electric off-road, and have been bitten by the short course bug.
No Responses to “Pro-Line Releases A Ton Of New Gear: 1/10-scale & Short Course”
Copyright © 2014 Air Age Media. All rights reserved.