Pro-Line Early December Releases

Pro-Line Early December Releases
New from Pro-Line:

Ford F-150 SVT Raptor Clear Body for SCRT10 and Hyper 10SC

This is a Pro-Line Ford® F-150 SVT Raptor Clear Body for Jammin SCRT10 & OFNA Hyper 10SC. Ford® fans here comes the ultimate off-road Short Course body with SVT Raptor styling! The Pro-Line Ford® F-150 race body for your Jammin SCRT10 & OFNA Hyper 10SC.

Features:

  • Bold Ford® F-150 SVT Raptor styling
  • Bolt on modular number and side dam plates
  • Exceptional detail and style
  • Made with Crystal Clear Genuine GE Lexan®
  • Four steps to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new Ford® F-150 onto your Jammin SCRT10 or OFNA Hyper 10SC.

  • Made in the USA

What’s Included:

  • Pro-Line Ford® F-150 SVT Raptor Clear Body (1)
  • Number and side dam plates (2)
  • Aluminum Hardware Pack
  • Window templates
  • Decal Sheet

Body Specs

Length: 20.5″ (521mm)
Width: 8.9″ (226mm)
Height: 6.0″ (152mm)
Wheel Base: 12.4″ (315mm)

3346-00 – $35.66

Sniper SC 2.2″/3.0″ M3 (Soft) Tires Mounted on Renegade Black Wheels for Slash Rear, Slash 4×4 & Blitz Front or RearThis is a pair of Pro-Line Sniper SC Tires Mounted on Renegade Black Wheels. Honey, I blew up the Hole Shot! The Sniper uses the same design philosophy and technology as the Hole Shot, but scaled up to work on looser and dustier track conditions. After initial testing, Pro-Line team drivers Ryan Cavalieri and Travis Amezcua are already sold on the tire saying that the Sniper offers awesome forward traction and side bite on a variety of track conditions. The bigger pins also provide longer wear, giving you lasting traction through long A-mains.

“I had a chance to run the Pro-Line Sniper tires at Hot Rod, let me say, these are going to be a winner! Most noticeable was how much more traction/steering they had when the track was loose (the sun was still out and kinda wet, kinda dry). Normally my cars turn best with M4 Hole Shots, however, I ran the snipers in M3 and they turned just as good and had more bite out of the corners. The Sniper tires were great!”
– Chad Bradley, Team Driver

Eliminate the competition by picking up a set of Pro-Line’s new Sniper tires.
Tire Features:

  • Based on the World Champion Hole Shot
  • Pro-Line’s square-lug technology
  • Larger lugs for longer wear
  • Made from M3 (Soft)

Wheel Features:

  • Lightweight one-piece design
  • 2.2″ outer bead and 3.0″ inner bead
  • Simulated Bead-Loc ring
  • Wheel made from high-strength, durable DuPont nylon material
  • 10 Spoke design for increased rigitity

What’s Included:

  • Sniper tires mounted on Renegade wheels (2 pcs)

SPECS:

Height: 4.23″ (107mm)
Width: 1.70″ (43mm)

1165-13

Sniper M3 (Soft) Off-Road 1:8 Buggy Tires Mounted on V2 White Wheels for Front or Rear

This is a pair of Pro-Line Sniper 1/8 Buggy Tires mounted on V2 White Wheels. Honey, I blew up the Hole Shot! The Sniper uses the same design philosophy and technology as the Hole Shot, but scaled up to work in looser and dustier conditions. After initial testing, Pro-Line team drivers like Ryan Cavalieri and Travis Amezcua are already sold on the tire saying that the Sniper offers awesome forward traction and side bite in a variety of track conditions. The bigger pins also provide longer wear, giving you lasting traction through long A-mains.

“I had a chance to run the Pro-Line Sniper tires at Hot Rods, let me say these are going to be a winner! Most noticeable was how much more traction/steering they had when the track was loose (the sun was still out and kinda wet, kinda dry). Normally my cars turn best with M4 Hole Shots, however I ran the snipers in M3 and they turned just as good and had more bite out of the corners. The Sniper tires were great!” – Chad Bradley, Team Driver

Eliminate the competition by picking up a set of Pro-Line’s new Sniper tires.

Tire Features:

  • Based on the World Champion Hole Shot
  • Pro-Line’s square-lug technology
  • Larger lugs for longer wear
  • Made from M3 (Soft)

What’s Included:

  • Sniper tires mounted on V2 Wheels (2 pcs)

SPECS:

Height: 4.45″ (113mm)
Width: 1.68″ (43mm)

9035-32

Street Fighter SC 2.2″/3.0″ Pro-Core M2 (Medium) Tires for Slash, Slash 4×4, SC10, Ultima SC & Blitz Front or Rear

This is a pair of Pro-Line Street Fighter SC 2.2″/3.0″ Pro-Core Tires. Pro-Line Racing is proud to introduce the new and innovative Pro-Core tire technology. This technology is so new that it is still under development by our R&D department, but we were too excited to keep it to ourselves. Be a part of history and join us in testing out this ultra-durable and high-performance technology. This is only available for a limited time and only available direct from Pro-Line, so be the first to test out this new technology and provide feedback to our development team!

Looking for the ultimate long wear street tire? Then check out Pro-Line’s Street Fighter SC. Based on the latest in high performance on-road tire technology, the Street Fighter SC has the perfect balance of G force enhancement and style that will keep your truck turning heads. The Street Fighter SC tire features Pro-Line’s advanced Pro-Core technology eliminating the need for foam inserts and making it one of the most durable tires ever made. Get your set while supplies last!

Tire Features:

  • Pro-Core technology enhances durability and corner speeds
  • Pro-Core technology eliminating the need for foam inserts
  • Standard 2.2″/3.0″ SC bead dimensions
  • Aggressive long wear tread
  • Made from M2 (Medium) compound

What’s Included:

  • Street Fighter SC 2.2″/3.0″ Left Tire (1)
  • Street Fighter SC 2.2″/3.0″ Right Tire (1)

SPECS:

Height: 4.30″ (109mm)
Width: 1.80″ (46mm)

1167-01 – $21.21

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: January 7, 2011 — 3:32 AM
Air Age Media ©