ST Racing Concepts Option Parts for Kyosho Ultima SC, SC-R, RB5 and RT5

RCCARACTION Default Image

New from ST Racing Concepts:

CNC Machined Aluminum Front Suspension Brace w/o-ring for Ultima SC, SC-R, RB5 and RT5

This CNC Machined Aluminum front brace will solve the front suspension brace problem on your Kyosho off-road vehicles. The stock brace is held in by the bumper and constantly moves around and can come loose if the front bumper bends or breaks. This CNC machined aluminum front brace incorporates O-rings where the hinge-pins pass through, thus providing a snug fit on the hinge-pins and is less likely to come loose. Available in anodized Kyosho blue, gun metal, and web limited Red

STUM131B/GM/R CNC Machined Alum. Front Sus. Brace w/o-rings for Ultima SC, SC-R, RB5 and RT5 MSRP: $6.99

CNC Machined Aluminum Front Bulkhead with 25/30 deg. option

CNC Machined from high-grade aluminum, our bulkhead carries the same adjustability of 25 or 30 deg. front kick-up as the stock plastic piece, but offers far superior durability. The bulkhead also features set-screw holes for holding the inner hinge-pins (so it does not wear down the bulkhead). Available in Kyosho blue, gun metal and web limited Red anodizing

STUM502B/GM/R CNC Machined Aluminum Front Bulkhead with 25/30 deg. option MSRP: $13.99

CNC Machined Alum. Precision Steering Rack set

Add great precision, durability and improved steering feel with our CNC machined aluminum steering rack set. All components are CNC machined from high-grade aluminum for precise fit. Available in Kyosho blue, gun metal and web limited red anodizing.

STUM505SB/GM/R CNC Machined Alum. Precision Steering Rack set
MSRP: $28.99

CNC Machined Aluminum HD Front C-Hub Carriers

CNC Machined from high-grade aluminum, these front C-hub carriers will add great factory looks and increase the durability of the front suspension of your Kyosho Ultima SC, SC-R, RT5 and RB5. Available in Kyosho blue, gun metal and web limited red anodizing. Sold in pairs

STUM505CB/GM/R CNC Machined Aluminum HD Front C-Hub Carriers
MSRP: $21.99

CNC Machined Aluminum Rear Camber Link Mount

Increase the rigidity and durability of the rear of the Kyosho Ultima SC, SC-R, RT5 and RB5 with this CNC Machined aluminum rear camber link mount. Machined from high-grade aluminum, this rear camber link mount also features a slightly raised battery strap slot to accommodate lipo batteries with taller plastic casing. Anodized in Kyosho blue, gun metal and web limited red.

STUM508RB/GM/R CNC CNC Machined Aluminum Rear Camber Link Mount
MSRP: $21.99

CNC Machined Aluminum Rear Pivot Blocks

CNC Machined from high-grade aluminum, these aluminum rear pivot blocks will increase the durability and precision of the rear suspension on your Kyosho Ultima SC, SC-R, RT5 and RB5. Available in Kyosho blue, gun metal and web limited red anodizing. Including hardware

STUM508XB/GM/R CNC Machined Aluminum Rear Pivot Blocks
MSRP: $16.99

CNC Machined Aluminum Heatsink Finned Motor Plate

CNC Machined from high-grade aluminum, these aluminum heatsink finned motor plate help dissipate heat from the motor and also adds great looks to your Kyosho off-road vehicles. The motor screw slots were also lengthened to accommodate bigger pinion gears to be used to obtain proper gear ratios for today’s 17.5 brushless motors. Available in Kyosho blue, gun metal and web limited red anodizing.

STUM517B/GM/R CNC Machined Aluminum Heatsink Finned Motor Plate
MSRP: $10.99

CNC Machined Aluminum Hub Carriers SP2 style (0, 0.5 and 1 degree toe-in)

CNC Machined from high-grade aluminum, these hub carriers features extra camber link holes for more suspension adjustment, and various degrees of toe-in for you to further dial in your Kyosho off-road cars or trucks. Bearing holes are CNC machined after anodizing to ensure the most precision fit possible, while the set-screw on hinge-pin design make sure the fit is perfect and the hinge-pins does not wear down the hub carriers. Available in Kyosho blue, gun metal and web limited red anodizing. Sold in pairs

STUM519-0B/GM/R CNC Machined Aluminum Hub Carriers SP2 style, 0 degrees toe-in MSRP: $24.99

STUM519-1B/GM/R CNC Machined Aluminum Hub Carriers SP2 style, 1 degrees toe-in MSRP: $24.99

STUM519-5B/GM/R CNC Machined Aluminum Hub Carriers SP2 style, 0.5 degrees toe-in MSRP: $24.99

Carbon Fiber Extended Battery Hold Down Plate

Machined from high-grade Carbon Fiber, this battery plate features an extended “nose” up front to hold down the battery foam spacers. Light weight and strong at 3.0mm thickness, the carbon fiber plate also adds great factory look. Works with Ultima SC, SC-R and RT5.

STUM558C Carbon Fiber Extended Battery Hold Down Plate
MSRP: $19.99

CNC Machined Aluminum lock-pin type Hex Adapters (4 pcs)

CNC Machined from high-grade aluminum, these 12mm Machined Hex adapters offers more durability and precision over the plastic stock pieces and are less likely to “round off” and loose its grip with the wheels. Setscrew on the hex adapters securely holds it in place over the axles. Available in Kyosho blue, gun metal and limited web edition red anodizing. Sold in set of 4

STUM603B/GM/R CNC Machined Aluminum lock-pin type Hex Adapters (4 pcs)
MSRP: $17.99

__________________
Trevor “Chilly” Duncan
Online News Editor
Radio Control Car Action
rccanews@airage.com
https://www.rccaraction.com

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 20, 2015 — 4:48 PM
Air Age Media ©