Best Day Ever Promo RCCA
Log In

HPI and Hot Bodies releases for August

HPI and Hot Bodies releases for August

New from HPI and Hot Bodies:

Name:  104669_001p.jpg
Views: 4
Size:  47.7 KB

Name:  104669_002p.jpg
Views: 4
Size:  81.6 KB

Name:  104669_003p.jpg
Views: 4
Size:  49.2 KB

Name:  104669_004p.jpg
Views: 4
Size:  79.2 KB

RTR Sprint 2 Sport with 1969 Chevrolet Camaro body

The RTR Sprint 2 Sport is now available with the classic 1969 Chevrolet® Camaro® body, pre-painted in bright orange paint, with white stripes, chrome bumpers and vintage wheels/tires for an authentic muscle car look. The Sprint 2 Sport comes with all of the features of the standard Sprint 2, minus the battery pack and charger, giving racers the ability to pick their favorite packs or save money and use their existing packs and charger.

The Sprint 2 Sport is the perfect club racer and is the ideal entry into RC racing fun! Its chassis is almost indestructible and easy to drive, but also has all the racing features you need for a perfect set up on most racetracks. The “out of the box” settings include fully adjustable suspension with control over important settings like camber, caster, toe in, ride height, Ackerman, springs etc. to fine tune your car for faster lap times!

The Sprint 2 Sport chassis delivers excellent handling. A belt driven 4 wheel drive system guarantees smooth power transfer and high grip on a wide variety of paved surfaces. Plus, the race proven suspension with oil filled shock absorbers offer lots of racing features you wouldn’t expect from a Sport car: adjustable camber and toe-in links, extra long upper links with new multiple mounting positions, adjustable Ackerman settings, adjustable droop, different caster and toe in blocks included in the kit… to name but a few.

With a big foam front bumper, a reinforced chassis, upper deck and shock towers you’ll see that the Sprint 2 Sport can take the abuse of racing on the track and on the street! All important chassis and suspension parts are made from high quality, high impact nylon which makes the Sprint 2 extra tough! The fully ball raced, dual belt, 4 wheel drive transmission with only one geared step (48dpi motor pinion to spur gear) is very efficient and capable of handling high power modified electric motors.

With sealed gear differentials front and rear, you never have to worry about time-intensive diff rebuilds on your Sprint 2 Sport. The strong and flexible HPI polycarbonate body shell resists cracking and other damage! 8 rubber sealed ball bearings at the wheel axles and 6 more ball bearings at all other axles don’t wear out like metal or plastic bushings and provide lower friction and more speed.

When you’re ready, it will be very easy to hop up your Sprint 2 Sport. Install a new body shell from HPI’s great range of bodies, get some HPI wheels with high traction tires, or a wide variety of option parts for the Sprint 2 Sport!

The Sprint 2 Sport is a rock solid car for beginners and club racers. The Sport version includes everything you need, just add your own battery pack and charger! Run the car straight out of the box and enjoy the great handling and the awesome performance. If you want to compete on a race track, all the foundations are in place to tune your Sprint 2 Sport and to set it up for some really fast lap times.

Features:

  • Pre-painted 1969 Chevrolet® Camaro® body with bright orange paint, white stripes and chrome bumper decals.
  • High quality HPI SC-15 Reversible ESC and 15 Turn Firebolt electric motor.
  • Satin chrome Vintage 5 Spoke wheels and treaded Vintage tires for authentic muscle car looks.
  • Foam bumper protects the car from potentially damaging impacts.
  • Adjustable rear body posts allow you to mount a variety of different bodies without trimming or replacing the posts.
  • Fine tune your suspension with adjustable turnbuckles.
  • Complete set of ball bearings for a smooth and efficient drivetrain.
  • Oil-filled coil-over shock absorbers.
  • 2 degree and 3 degree rear hubs for additional tuning choices.
  • Durable injected molded nylon main chassis.
  • Front and rear shock towers with optimized shock absorber and camber link positions for ideal suspension geometry.
  • Optional low profile front shock tower is included in the kit which allows the use of the full range of HPI bodies.
  • Droop screws allow you to “race tune” your suspension settings.
  • Precise bellcrank steering.

Specifications:

Length 17″ (431mm)
Height 5″ (127mm)
Width 7.5″ to 8.0″ (190mm to 200mm) (adjustable using offset wheels)
Wheelbase 10″ (254mm)

#104669 RTR SPRINT 2 SPORT W/ 1969 CHEVROLET® CAMARO® Z28® $349.00

Name:  104819_000p.jpg
Views: 3
Size:  54.5 KB

Name:  104819_001p.jpg
Views: 3
Size:  63.7 KB

Name:  104819_002p.jpg
Views: 3
Size:  59.8 KB

RTR Sprint 2 Sport with 2010 Chevrolet Camaro body

The RTR Sprint 2 Drift Sport is now available with the aggressive 2010 Chevrolet® Camaro® body, pre-painted in bold matte black paint with chrome and gold decals for a street tuner/drift look. The chassis is factory assembled right out of the box, making the Sprint 2 Drift Sport the quick and easy way to practice your drifting skills. The RTR Sprint 2 Drift Sport is a complete drift machine that looks and drifts just like the real thing.

The RTR Sprint 2 Drift Sport chassis is 4WD for consistent drift action on a wide variety of surfaces, easy to drive, and has all of the features you need to adjust for a perfect drift set-up: camber, toe-in, ride height, Ackerman, and a wide variety of available shock oils and shock springs! With a big foam front bumper, reinforced molded nylon chassis, upper deck and shock towers, you’ll see that the Sprint 2 Drift Sport can easily take the abuse of drift driving. The full ball bearing, dual belt, 4 wheel drive transmission is very efficient and capable of handling high power modified electric motors down to 10 turns. Standard equipment includes a 15 turn motor, reversible electronic speed control, and a high quality HPI TF-1 radio system. And it’s all pre-built to precise factory specs to get you drifting quickly. Just add a battery pack, install AA batteries in the transmitte
r, and you’re ready to start drifting!

Features:

  • Pre-painted body with matte black paint and chrome & gold drift decals.
  • High quality HPI SC-15 Reversible ESC.
  • Officially licensed Rays/Volk TE37 chrome plated wheels. 6mm offset rear wheels fill out the fenders and give the wheels the wide look seen on full-size drift cars.
  • Hard compound Type A drift tires for controllable drifting with realistic looks and aggressive tread pattern.
  • Foam bumper protects the car from potentially damaging impacts.
  • Adjustable rear body posts allow you to mount a variety of different bodies without trimming or replacing the posts.
  • Fine tune your suspension with adjustable turnbuckles.
  • Complete set of ball bearings for a smooth and efficient drivetrain.
  • Oil-filled coil-over shock absorbers with specially chosen springs for drifting.
  • 2 degree and 3 degree rear hubs for additional tuning choices.
  • Durable injected molded nylon main chassis.
  • Front and rear shock towers with optimized shock absorber and camber link positions for ideal suspension geometry.
  • Optional low profile front shock tower is included in the kit which allows the use of the full range of HPI 190mm bodies.
  • Droop screws allow you to “race tune” your suspension settings.
  • Precise bellcrank steering.

Specifications:

Length 17″ (431mm)
Height 5″ (127mm)
Width 7.5″ to 8.0″(190mm to 200mm)(adjustable using offset wheels)
Wheelbase 10″ (254mm)

#104819 RTR SPRINT 2 DRIFT SPORT W/ 2010 CHEVROLET® CAMARO® $369.00

Name:  104947_000p.jpg
Views: 3
Size:  68.5 KB

Name:  104947_001p.jpg
Views: 3
Size:  67.8 KB

Savage Flux pre-painted GT-2 body

The Savage Flux GT-2 body comes pre-painted with decals applied so you can easily replace the stock body on the Savage Flux 2350. It’s decked out in stealth black paint with blue flames and dark grey accents. It’s pre-cut with body mounting holes pre-drilled, just bolt it on your Savage Flux truck and it will look as good as new!

  • Premium vinyl decals include window frames, headlights, tail lights, official logos and more – For a perfect finish with a lot of details
  • High quality polycarbonate with excellent dimensional stability and impact resistance – For extra strength and longer life
  • Pre-drilled body post holes
  • Fits most HPI Savage trucks and other monster trucks

#104947 SAVAGE FLUX GT-2 PAINTED BODY (BLACK/GRAY/BLUE) $55.00

Name:  102534_002p.jpg
Views: 3
Size:  79.8 KB

Savage Flux Conversion Set

Convert your nitro powered HPI Savage truck to electric power with this Savage Flux Conversion Set. The set comes with all of the mechanical parts needed for the conversion, including TVP chassis plates, motor mounts, pre-built heavy duty differentials, bulkheads, tough metal gears, super heavy duty dogbones, outdrives, axles, and all of the necessary mounting hardware. Everything is designed to handle the extreme power of brushless/Li-Po technology, so it’s built extra tough.

Electronics not included, HPI FLUX Brushless system recommended.

FEATURES:

  • All Metal Gear Transmission
  • Extreme durability designed for brushless motors and Li-Po batteries
  • Pre-assembled Heavy Duty Differentials
  • Tough front and rear heavy duty diffs, pre-built to make installation fast and easy
  • 44T Steel Spur Gear
  • Long life, reliable, gear ratio optimized for brushless motors and Li-Po batteries
  • Twin Battery Box
  • Holds up to two 2 cell Li-Po batteries or two 6 Cell NI-MH batteries
  • Super Heavy Duty Dogbones
  • 5mm thick steel dogbones deliver extreme durability for high power applications
  • Machine Cut Differential Ring and Pinion Gears
  • Machined steel for precise tolerances and extra strength
  • 2.5mm Aluminum TVP’s
  • Proven tough Savage TVP alloy chassis for durability
  • Twin Clamp 8mm Billet Aluminum Motor Mount
  • Designed to keep the brushless motor securely mounted, support for the front and rear of the motor
  • 3mm 7075 Aluminum Motor Plate
  • Thicker for more consistent gear mesh and durability

#102534 SAVAGE FLUX CONVERSION KIT FOR NITRO SAVAGE $249.00 Name:  104841_000p.jpg
Views: 0
Size:  41.9 KB

Blitz ESE Aluminum Front Suspension Arm Mount

This Aluminum Front Suspension Arm Mount is a replacement part for the BLITZ ESE and can be used as a high performance option part on BLITZ and Firestorm trucks. It’s precision machined from billet aluminum for a perfect fit, has 0 degrees of front kick-up, and has 2 set screws to secure the suspension pins for less slop.

#104841 ALUMINUM FRONT SUSPENSION ARM MOUNT (7075) $22.00

Name:  104505_012p.jpg
Views: 0
Size:  76.1 KB

Name:  104505_017p.jpg
Views: 0
Size:  88.9 KB

Name:  104505_020p.jpg
Views: 0
Size:  121.2 KB

Mini-Trophy clear DT-1 body

HPI Mini-Trophy owners can customize their trucks with this clear DT-1 body. The DT-1 is a direct replacement body for the Mini-Trophy, molded in crystal clear polycarbonate material for those that prefer to have a personal touch with their paint and graphics scheme. It comes with two huge decal sheets that are pre-cut for easy application.

  • Photorealistic die-cut premium vinyl decals include window frames, headlights, grill, tail lights and more, plus official logos!
  • Overspray film and pre-cut vinyl window masks make painting fast and simple
  • A decal instruction sheet is included for decal placement
  • The body has dimple marks for body post drill locations

#104505 DT-1 TRUCK BODY $35.00

Name:  38762_000p.jpg
Views: 0
Size:  47.0 KB

LED Light System for 1/10th scale drift cars

The HPI LED Light System for 1/10th scale drift cars features bright white LED’s for the headlights and red for the tail lights. 14 different modes are available to control the lighting effects, from non flashing for night driving to strobe flashing for custom drift looks.

A complete instruction manual is included to assist you with installation and selection of the various modes.

Everything plugs into standard battery and receiver plugs. This is set can also be used to add light
ing options on custom projects other than R/C cars.

We recommend using HPI #9009 Aluminum tape to attach the lights to the body, reflect the light, and shield the inside of the body from light leakage. The aluminum tape can also be used to mount the wiring to the inside of the body.

#38762 LED LIGHT SET (WHITE/RED) $38.00

Name:  61737_000p.jpg
Views: 0
Size:  73.3 KB

Subaru Impreza Type A Body (190mm)

Ultimate Racing Performance.

The HB Subaru Impreza Type A body was designed, tested, and proven on the race track.

The HB design staff and team drivers tested extensively using several different body shapes and aerodynamic variations.

The result of our testing is the “Type A” configuration that outperformed the other versions in terms of aggressive steering response and high corner speed.

The HB Subaru Impreza Type A is optimized for use with front spool set-ups found on most high performance touring cars.

High Performance Aerodynamic Features

The Type A body looks great, but it’s not just about looks. The bulges on the front bumper gave the body quicker initial turn-in steering, and the spoiler on the read deck gave the body extra stability during our track testing.

Smooth front bumper with a large splitter for high downforce and high efficiency.

Flat side panels for consistent stability on the track, reinforced to resist deflection at high speed.

The large wing mounts transfer more down-force from the wing to the ground for increased traction.

Direct Fit on the HB CYCLONE TC Chassis

Direct fit body post marks for the Cyclone TC chassis make mounting this body quick and easy.

Calibrated marks allow you to cut the wheel arches forward or backward to match the wheelbase of your chassis.

Extended mounting lines allow you to accurately move the body forward or backward on the chassis for fine tuning the handling of the car.

Standard Features

Crystal clear polycarbonate for light weight and high durability. Paint it with your own custom race colors!

Vinyl decals with headlights, grills, tail lights and official logos.

Window masks and overspray film to help make painting the body quick and easy.

Wheel center marks help you cut the wheel arches for all brands of cars.
High downforce clear polycarbonate rear wing with multiple side plates and cut lines.

Wing mounting hardware and double sided tape for attaching the wing side plates.

Designed to meet the rules and regulations of racing organizations. (Check with your racing organization for a list of approved bodies)

Officially Licensed SUBARU Body

The HB Subaru Impreza Type A (190mm) body is an officially licensed product that is based on the world famous

Subaru Impreza.

For Maximum Performance

The performance of the HB Subaru Impreza Type A will be maximized by reducing the gap between the body and the front bumper, especially on high speed race tracks.

#61737 Subaru Impreza Type A Body (190mm) $25.00

Name:  68720_000p.jpg
Views: 0
Size:  31.2 KB

One-way front differential

Get some extra corner speed with this HB one-way front differential.

#68720 FRONT ONE-WAY SET $60.00

Name:  68731_000p.jpg
Views: 0
Size:  35.8 KB

Aluminum diff outdrives

Beef up your diff without adding a bunch of weight with the HB aluminum diff outdrives.

#68731 ALUMINUM DIFF OUTDRIVE SET $34.00

Name:  68733_000p.jpg
Views: 0
Size:  30.1 KB

Center one way pulley

This center one way pulley is great for stock racing, situations where braking is minimal and large open tracks.

Allowing the front end to freewheel when off power, it enables you to carry more speed into the corner.

#68733 CENTER ONE WAY PULLEY 20T $40.00

Name:  68740_000p.jpg
Views: 0
Size:  24.6 KB

Spur gears

Easily remove your motor without the hassle of removing your spur. The new HB spur gears come with holes to access your motor screws.

68740 – HB RACING SPUR GEAR V2 110 TOOTH (64PITCH) $8.00
68741 – HB RACING SPUR GEAR V2 111 TOOTH (64PITCH) $8.00
68742 – HB RACING SPUR GEAR V2 112 TOOTH (64PITCH) $8.00
68743 – HB RACING SPUR GEAR V2 113 TOOTH (64PITCH) $8.00
68744 – HB RACING SPUR GEAR V2 114 TOOTH (64PITCH) $8.00
68746 – HB RACING SPUR GEAR V2 116 TOOTH (64PITCH) $8.00

Name:  68751_000p.jpg
Views: 0
Size:  28.9 KB

Heavy-duty lower bulkhead for the HB-TCX

Add strength without weight with this heavy-duty lower bulkhead for the HB-TCX. Made from 7075 aluminum, it’s more than strong enough.

#68751 HD LOWER BULK HEAD (1pc) $40.00

Name:  68752_000p.jpg
Views: 0
Size:  41.5 KB

Heavy-duty motor mount set for the HB-TCX

Add strength without weight with this heavy-duty motor mount set for the HB-TCX. Made from 7075 aluminum, it’s more than strong enough.

#68752 HD MOTOR MOUNT SET $50.00

__________________
Trevor “Chilly” Duncan
Online News Editor
Radio Control Car Action
rccanews@airage.com
http://www.rccaraction.com

Updated: October 27, 2010 — 12:16 PM

Leave a Reply

Your email address will not be published. Required fields are marked *

RC Car Action © 2016
WordPress Video Lightbox