Pro-Line Early March 2010 Releases

Pro-Line Early March 2010 Releases

New from Pro-Line:

Caliber 2.2″ M3 (Soft) Off-Road Buggy Rear Tires for 2.2″ Rear Buggy Wheels

Pro-Line’s popular Caliber tread is now available for 1:10 Off-Road Buggy. Pick your class, weather it’s Mod or Stock, when it comes to tires… the choice is clear, it’s Pro-Line’s Caliber 2.2″ Buggy Rear Tires.

The Caliber takes tire technology to the next level by optimizing traction, control, balance, and tire wear with its dual-stage design. The smaller top pin penetrates through loose dirt while delivering unbelievable side and forward bite. The base pin works as a support for the top pin while acting as a dual-stage design once the top pin is worn down. You can rely on the base pin for greater tread life wear and it works well on those tracks that are prone to blue-groove or have a super clean surface.

Tire Features:

  • Dual-stage pin design for exceptional tread life
  • Small top pin for light to heavy loose dirt
  • Base pin extraordinary on hard-packed/blue-groove surfaces
  • Square-lug technology throughout the tread design
  • Directional tread design
  • Available in World Championship/extremely proprietary M3 (Soft) compound
  • Internal sidewall ribbing for lateral support and increased cornering control
  • Cut foam included

What’s Included:

  • Caliber 2.2″ Buggy Rear Tires (2 pieces)
  • Cut foam inserts (2 pieces)

SPECS:

Height:3.45″ (88mm)
Width:1.66″ (42mm)

8210-02 | M3 (Soft)

Caliber 2.2″ 4WD M3 (Soft) Off-Road Buggy Front Tires for 2.2″ 4WD Front Wheels

Pro-Line’s popular Caliber tread is now available for 1:10 Off-Road Buggy. Pick your class, weather it’s Mod or Stock, when it comes to tires… the choice is clear, it’s Pro-Line’s Caliber 2.2″ 4WD Buggy Front Tires.

The Caliber takes tire technology to the next level by optimizing traction, control, balance, and tire wear with its dual-stage design. The smaller top pin penetrates through loose dirt while delivering unbelievable side and forward bite. The base pin works as a support for the top pin while acting as a dual-stage design once the top pin is worn down. You can rely on the base pin for greater tread life wear and it works well on those tracks that are prone to blue-groove or have a super clean surface.

Tire Features:

  • Dual-stage pin design for exceptional tread life
  • Small top pin for light to heavy loose dirt
  • Base pin extraordinary on hard-packed/blue-groove surfaces
  • Square-lug technology throughout the tread design
  • Directional tread design
  • Available in World Championship/extremely proprietary M3 (Soft) compound
  • Internal sidewall ribbing for lateral support and increased cornering control
  • Cut foam included

What’s Included:

  • Caliber 2.2″ 4WD Buggy Front Tires (2 pieces)
  • Cut foam inserts (2 pieces)

SPECS:

Height:3.45″ (88mm)
Width:1.33″ (34mm)

8211-02 | M3 (Soft)

__________________
Trevor “Chilly” Duncan
Online News Editor
Radio Control Car Action
rccanews@airage.com
https://www.rccaraction.com

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: October 27, 2010 — 12:18 PM
Air Age Media ©