Pro-Line and PROTOform Mid January Releases

RCCARACTION Default Image
New from Pro-Line and PROTOform:

Chevy® Silverado™ 1500 Clear Body for Slash®, Slash® 4×4 and SC10 (with trimming)

Chevy® race fans get ready to go thrashing through your off-road terrain with your Traxxas® Slash®, Slash® 4×4 or Associated SC10 (additional trimming required) and Pro-Line’s Chevy® Silverado™ race body.

Features:

  • Bold off-road Short Course (SC) styling
  • Extremely pronounced fenders for an attack-like stance
  • Exceptional detail and style
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new Chevy® Silverado™ onto your Slash®

  • Made in the USA

What’s Included:

  • Clear Chevy® Silverado™ 1500 Body
  • Window mask
  • Decal sheet

3307-60 | Chevy® Silverado™ 1500 $35.95

 

14RS Clear Body for Slash®, Slash® 4×4, and SC10 (with trimming)

Off-Road Rally fans get pumped to convert your Traxxas® Slash®, Slash® 4×4 or Associated SC10 (additional trimming required) into desert pounding beast with Pro-Line’s new 14RS Rally Race body.

Features:

  • Bold desert rally styling now ready to convert your Short Course (SC) truck into a South American Rally Champion
  • Fast lines and aggressive rally detail and style
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new RS14 onto your Slash®, Slash® 4×4, or SC10

  • Made in the USA

What’s Included:

  • Clear 14RS Body
  • Window mask
  • Decal sheet
  • 3M® strips for rear hatch

3319-00 | 14RS $33.95

 

1980 Chevy® Blazer™ Clear Body for 1:18 Rock Crawler

1:18 Crawlers and scale builders are you ready for new body for your rig? Check out the 1980 Chevy® Blazer™ Clear body from Pro-Line.

Features:

  • Classic style and old school look of your 1:18 ride
  • Made from Crystal Clear Lexan®
  • Perfect fit for Team Losi’s 1:18 crawler
  • Four step to Crawling Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new Chevy® Blazer™ onto your 1:18 crawler

  • Made in the USA

What’s included:

  • Clear 1980 Chevy® Blazer™ Body
  • Window mask
  • Decal sheet
  •  

3244-40 | 1980 Chevy® Blazer™ $27.95

Suburbs 2.2″ 4WD Off-Road Buggy Front Tires for 2.2″ 4WD Front Wheels

The 2008 ROAR National Champion tread and compound is now available for your 4WD buggy front. Introducing the Suburbs 4WD front tire in Pro-Line’s M3 (Soft), new MX (Blue-Groove/High Heat) and MC (Clay) compounds.

At the 2008 ROAR 1:10 Off-Road Nationals, Ryan Cavalieri and Jared Tebo dominated the 2WD and 4WD Mod Buggy classes with the Suburbs, now you too can have the same performance they had right out of the bag.

Features:

  • Available in M3 (Soft) and new MX (Blue-Groove/High Heat) and new MC (Clay)
  • National Championship winning compound and tread design
  • Inner and outer radius rib tread for increased corner holding and predictable side-bite.
  • Internal carcass webbing resist tire expansion under acceleration and deceleration
  • Internal sidewall ribbing maintains sidewall structure in extreme traction conditions for greater corner control
  • Tread height is predictable, aggressive, and long-lasting for use on a variety of blue-groove track and surfaces where you would typically run soft compound tires
  • Single stage firm foam inserts
  • Pro-Line branded laser etched sidewall detail
  • Made in the USA

What’s Included:

  • Suburb 4WD front tires (2 pcs)
  • Single stage firm foam insert (2 pcs)

M3 (Soft) Compound (green dot)

  • Perfect for those loose dirt track wet or dry.
  • Works great for cooler track temperatures.

MX (Blue-Groove/High Heat) Compound (double orange dot)

  • High-heat/blue groove compound
  • Works best on clean surfaces
  • Long wearing on the most abrasive tracks
  • Forms to track surface for unmatched predictability

MC (Clay) Compound (purple dot)

  • Great for indoor clay surface
  • Prefers low track temperatures/wet surfaces
  • Receptive to the use of traction additives
“I was amazed at how well the M3 compound performed at my local track. Never before has a tire outperformed the Hole Shot until now. It’s the new tire of choice for my local track,” team driver Chad Parks.

“The MX compound is amazing. I race at a super high bite, high heat, blue-groove track and the MX compound outlasts and outperforms anything else I’ve tested,” says Pro-Line team driver Scott Spears.

“I’ve run every clay compound tread on the market. By far, the new MC compound from Pro-Line was way beyond anything else I have ever ran. I know that you too will experience what I did on clay with the new MC compound,” Eric Schutt, Pro-Line enthusiast.

SPECS:

Height:3.35″ (85mm)Width:1.33″ (34mm)

8208-02 | M3 (Soft) $14.50
8208-16 | MX (Blue-Groove/High Heat) $14.50
8208-17 | MC (Clay) $14.50

 

Volkswagen® Baja Bug Clear Body for 1:16 E-REVO®

1:16 E-REVO® is even more exciting when it’s covered with Pro-Line’s new VW® Mini Body.

Features:

  • VW® Style and Baja look make this the perfect 1:16 E-REVO® upgrade
  • Extremely round profile make roll-overs a breeze while protecting your chassis
  • Made from Crystal Clear Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new VW onto your 1:16 E-REVO®

  • Made in the USA

What’s included:

  • Clear VW® Baja Bug Body
  • Window Mask
  • Detail decal sheet

3238-31 | VW® Baja Bug Body $25.95

ProTrac™ Suspension Kit Split Six Wheels for Front & Rear Slash® with Pro-Line ProTrac™ Suspension Kit

Short Course racing just got more colorful with Pro-Line’s Spilt Six Wheels in White and Yellow.

The Split Six design is the staple look of short course vehicles. Until now, it’s only been available in a 3 piece bead-loc design. Now, Pro-Line offers a lightweight one-piece glueable design that’s more affordable and completely performance driven for Slash® with ProTrac™ Suspension Kit.

Pro-Line’s new ProTrac™ Suspension kit for Slash® is one easy to install kit that greatly increases forward acceleration, corner speed, consistency and drivability. The critics are ranting and raving about ProTrac™.

“The result is almost staggering after my test down at OCRC Raceway. We can’t recommend this kit enough,” says Xtreme R/C Car Magazine.

“…it all comes down to the numbers. According to the stopwatch, my laps were about 1 ½ to 2 seconds faster with the Pro-Line suspension system,” says RC Car Action Magazine.

What’s included:

  • Split Six One-Piece lightweight glueable design
  • Negative 10mm offset for ProTrac™ Suspension Kit
  • 2.2” outer bead and 3.0” inner bead
  • Simulated Bead-Loc ring
  • Wheel made from high-strength, durable DuPont® nylon material
  • A deep, satin black, white or yellow finish on all Split Six wheels

What’s included:

  • Split Six glueable wheels Front or Rear (2pcs)

2723-00 | ProTrac™ Suspension Kit Split Six Black Wheels $9.49
2723-02 | ProTrac™ Suspension Kit Split Six Yellow Wheels $9.49
2723-04 | ProTrac™ Suspension Kit Split Six White Wheels $9.49

 

Split Six 2.2″/3.0″ One-Piece Front Wheels for Slash® Front

Short Course racing just got more colorful with Pro-Line’s Spilt Six Wheels in White and Yellow.

The Split Six design is the staple look of short course vehicles. Until now, it’s only been available in a 3 piece bead-loc design. Now, Pro-Line offers a lightweight one-piece glueable design that’s more affordable and completely performance driven for Slash®, Slash® 4×4 and Blitz.

Wheel Features:

  • Lightweight one-piece design
  • 2.2″ outer bead and 3.0″ inner bead
  • Simulated Bead-Loc ring
  • Wheel made from high-strength, durable DuPont® nylon material
  • For use on Slash® front (#2720) and Slash® rear or Slash® 4×4 front/rear and Blitz front/rear (#2721)
  • Same track width as stock wheels
  • A deep, satin black, white or yellow finish on all Split Six wheels

What’s Included:

Split Six wheels (2 pcs)

2720-02 | Split Six Front Black Wheels $8.07
2720-08 | Split Six Front Yellow Wheels $8.07
2720-04 | Split Six Front White Wheels $8.07

Split Six 2.2″/3.0″ One-Piece Rear Wheels for Slash® Rear, Slash® 4×4 Front or Rear & Blitz Front or Rear

Short Course racing just got more colorful with Pro-Line’s Spilt Six Wheels in White and Yellow.

The Split Six design is the staple look of short course vehicles. Until now, it’s only been available in a 3 piece bead-loc design. Now, Pro-Line offers a lightweight one-piece glueable design that’s more affordable and completely performance driven for Slash®, Slash® 4×4 and Blitz.

Wheel Features:

  • Lightweight one-piece design
  • 2.2″ outer bead and 3.0″ inner bead
  • Simulated Bead-Loc ring
  • Wheel made from high-strength, durable DuPont® nylon material
  • For use on Slash® front (#2720) and Slash® rear or Slash® 4×4 front/rear and Blitz front/rear (#2721)
  • Same track width as stock wheels
  • A deep, satin black, white or yellow finish on all Split Six wheels

What’s Included:

  • Split Six wheels (2 pcs)

2721-02 | Split Six Slash® Rear, Slash® 4×4 front/rear and Blitz front/rear Black Wheels $8.07
2721-08 | Split Six Slash® Rear, Slash® 4×4 front/rear and Blitz front/rear Yellow Wheels $8.07
2721-04 | Split Six Slash® Rear, Slash® 4×4 front/rear and Blitz front/rear White Wheels $8.07

TCC Replacement Wing Set for 1230-30 TCC Body

Oval racers who race with the popular PROTOform TCC race body (#1230-30) have requested that we produce TCC wings to be made available separately. We’ve responded with this double wing set pulled in durable lexan. These wings with the add-on spill plates are identical to the wings that are included with the body at the time of purchase. Now you’re able to have extra wings in your pit box to allow for experimentation (with varying degrees of downforce) and the ability to replace damaged wings.

Features:

  • Direct replacement wings for the #1230-30 TCC Oval body
  • Add-on spill plates
  • Protective overspray coating

What’s included:

  • TCC Clear Wings with sill plates (2)
  • Mounting hardware included

1230-40 | TCC Replacement Wings $11.95

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 22, 2015 — 11:31 AM
Air Age Media ©