LRP gear: Wheels stickers, BEC Capacitor, Sensor-Wire, X12 9.5, 1/8th tires & foam

LRP gear: Wheels stickers, BEC Capacitor, Sensor-Wire, X12 9.5, 1/8th tires & foam

New from LRP:

VTEC wheel stickers

With the new LRP VTEC wheel stickers for LRP VTEC 1/10th tires you can pimp your R/C car with a new and stylish look and be ready for the next race!

The VTEC wheel stickers comes is in 2 different designs for personal choice and each wheel sticker are pre-cut for easy and fast styling. Each sticker sheet includes 12 wheel stickers, for 3 sets of tires.

#65076 VTEC Felgenaufkleber Multi Spoke
#65075 VTEC Felgenaufkleber Racing 10-Spoke

BEC Stabilizing Capacitor

BEC Stabilizing Capacitor that prevents the voltage of your receiver from dropping under correct working level.

This smart BEC Stabilizing Capacitor stabilizes the voltage for your receiver and is especially important when running in racing classes that runs on a low level of voltage input, such as 4-cell 1/12th class. The new LRP BEC Stabilizing Capacitor works for any receiver on the market, no matter if its FM or 2.4GHz receivers.

Can be used in either electric or nitro models, just plug into any open slot on your receiver and you are ready to go!

#80135

LRP High Flex Sensor-Wire

Extra flexible high-quality sensor wires for your motor and speed control connection.

The high-flex sensor wires makes installation and usage in any R/C model smoother and more easy than ever before. Offered in 4 different lengths for optimized fit between the motor and speedo for any R/C model or electronics configuration.

#819307 LRP Sensor-Wire High Flex 70mm
#819310 LRP Sensor-Wire High Flex 100mm
#819315 LRP Sensor-Wire High Flex 150mm
#819320 LRP Sensor-Wire High Flex 200mm

Vector X12 Brushless Modified – 9.5t (stock photo above)

VECTOR X12

LRP has developed a completely new revolutionary brushless motor the r/c scene has never seen before. The ”VECTOR X12 brushless motor sets new benchmarks when it comes to electric motor performance and will be the motor to beat for high-level racing competition. The R&D team has been hard at work, developing a completely new brushless base platform. Together with the LRP Factory team they have spent many hours of track time and all the knowledge gained during the last couple of years being the leader in brushless R/C technology to achieve the best product possible.

Features:

The VECTOR X12 features a totally new design structure, including the fully adjustable and replaceable PreciSensorTM system, a completely new precision sensor positioning system for power, torque, throttle response and efficiency never seen before. The motor is unlike any other brushless motor! Constructed of 2 main parts and using only 4 screws, resulting in a motor which is easier to work on and the possibility to access and replace the rotor with the motor still left in the car. In addition to this it features an all new sintered 12.5mm size magnet graded on a new strengthened shaft, to further optimize the motors performance, efficiency and mid-range torque. This new X12 has been perfected in every small detail which makes this new brushless motor setting the new benchmark in brushless performance!

Features:

  • Dismountable – Machined 7075-T6 aluminum can, short/light-weight design and maximum airflow.
  • Easy solder Design – Heavy copper, multilayer PCB for lowest resistance.
  • PreciSensor System – Revolutionary precise senor positioning for best power, throttle and efficiency. Fully and adjustable replaceable
  • Reproducible Timing – Timing adjustable in clearly defined, reproducible steps with new molded timing inserts for same result every time
  • O-Ring – Dampening and optimized bearing size for vibration-free operation
  • 12.5 mm Magnet – All new sintered 12.5 mm magnet size and grade, for best efficiency and midrange torque and new high-strength shaft
  • New Packed Stack – With minimized core losses for lowest temperature and higher efficiency

Specifications

RPM 28.080
Power 285W
Voltage Input 4.8-7.4V
Efficiency 93%
Specific rpm/volt, kv 3.900

#50642

VTEC 1/8 Off-Road Truggy LP Suicide tires

VTEC continues to confirm its position as the foremost R/C tire manufacturer on the market today. Just like its smaller buggy tire brother, the VTEC 1/8 Truggy “LP” Competition tires are based on a special compound of high-quality rubber which combines high grip with low tire wear.

The all new Truggy “LP” tires have been developed through long and extensive testing and are offered in 3 different tread designs with different compound hardness for any tire of racing situation. High-grip, low-grip, dusty, blue groove, qualifying, long mains, wet, Astroturf or indoor conditions, the VTEC 1/8 Truggy “LP” Competition Tire Line can do them all!

Truggy LP stands for “Low Profile”. The tire is specially designed with a lower sidewall for more direct response and higher cornering speed.

Features

  • “LP” Low Profile – lower sidewalls for more direct response and higher cornering speed
  • Highest Grip
    and longest lifetime

  • Pre-cut venting holes
  • Special angled sidewall design – less sidewall flex and improved cornering stability
  • Different rubber compounds and profiles for different conditions
  • Compound identification on the side wall
  • Including molded yellow foam tire insert
  • Inside stability ribs for less ballooning
  • pre-glued and balanced
  • Thread design with very fine pins, suitable for hard packed or humid race tracks
  • Excellent qualifying tire

#65523S VTEC 1/8 Off-Road Truggy LP Suicide tire incl. molded insert -SOFT Compound
#65523M VTEC 1/8 Off-Road Truggy LP Suicide tire incl. molded insert – MEDIUM Compound
#65522SS VTEC 1/8 Off-Road Truggy LP Suicide wheel pre-mounted – SUPER SOFT Compound
#65522S VTEC 1/8 Off-Road Truggy LP Suicide wheel pre-mounted – SOFT Compound

VTEC 1/8 Off-Road Truggy LP Kamikaze tires

VTEC continues to confirm its position as the foremost R/C tire manufacturer on the market today. Just like its smaller buggy tire brother, the VTEC 1/8 Truggy “LP” Competition tires are based on a special compound of high-quality rubber which combines high grip with low tire wear.

The all new Truggy “LP” tires have been developed through long and extensive testing and are offered in 3 different tread designs with different compound hardness for any tire of racing situation. High-grip, low-grip, dusty, blue groove, qualifying, long mains, wet, Astroturf or indoor conditions, the VTEC 1/8 Truggy “LP” Competition Tire Line can do them all!

Truggy LP stands for “Low Profile”. The tire is specially designed with a lower sidewall for more direct response and higher cornering speed.

Features:

  • “LP” Low Profile – lower sidewalls for more direct response and higher cornering speed
  • Highest Grip and longest lifespan
  • pre-glued and balanced
  • Pre-cut venting holes
  • Special angled sidewall design – less sidewall flex and improved cornering stability
  • Different rubber compounds and profiles for different conditions
  • Compound identification on sidewall
  • Including molded yellow foam tire insert
  • Inside stability ribs for less ballooning
  • Optimized tread design for all kind of race track
  • Perfect all-round tire

#65520S VTEC 1/8 Off-Road Truggy LP Kamikaze wheel pre-mounted – SOFT Compound
#65520SS VTEC 1/8 Off-Road Truggy LP Kamikaze wheel pre-mounted – SUPER SOFT Compound

VTEC 1/8 Off-Road Truggy LP Harakiri tires

LRP is proud to present a completely new line of tires with the new VTEC 1/8 Off-road Truggy “LP” Competition Tires. VTEC continues to confirm its position as the foremost R/C tire manufacturer on the market today. Just like its smaller buggy tire brother, the VTEC 1/8 Truggy “LP” Competition tires are based on a special compound of high-quality rubber which combines high grip with low tire wear.

The all new Truggy “LP” tires have been developed through long and extensive testing and are offered in 3 different tread designs with different compound hardness for any tire of racing situation. High-grip, low-grip, dusty, blue groove, qualifying, long mains, wet, Astroturf or indoor conditions, the VTEC 1/8 Truggy “LP” Competition Tire Line can do them all!

Truggy LP stands for “Low Profile”. The tire is specially designed with a lower sidewall for more direct response and higher cornering speed.

Features

  • “LP” Low Profile – lower sidewalls for more direct response and higher cornering speed
  • Highest Grip and longest lifetime
  • Special angled sidewall design – less sidewall flex and improved cornering stability
  • Different rubber compounds and profiles for different conditions
  • Compound identification on sidewall
  • Including molded yellow foam tire insert
  • Inside stability ribs for less ballooning
  • Special tread design for long lifespan with large block pattern, suitable for long and tough finals
  • Special tread design with large block pattern, suitable for loose dirt or broken, rutted race tracks

#65525SS VTEC 1/8 Off-Road Truggy LP Harakiri tire incl. molded insert – SUPER SOFT Compound
#65524SS VTEC 1/8 Off-Road Truggy LP Harakiri wheel pre-mounted – SUPER SOFT
#65524S VTEC 1/8 Off-Road Truggy LP Harakiri wheel pre-mounted – SOFT Compound

VTEC 1/8 off Road Truggy LP form insert – soft – yellow (2 pc.)

Particularly preformed full foam insert for 1/8 off Road Truggy LP competition tire. Available in the degree of hardness softly (yellow).

#65535

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: November 23, 2010 — 5:21 PM
Air Age Media ©