Make your own under-body lighting

RCCARACTION Default Image
You can make an inexpensive under-body lighting kit with a couple of LED lights (available at RadioShack or any electronics store) and a clear straw. Cut the straw to the desired length, and glue the LEDs to each end of the straw with Shoe-Goo. Wire the LEDs in parallel, and then solder a receiver connector to the wires. Glue the straw to the body, and plug the connector into the receiver’s battery port to activate the lights.

Larry DeMarco
Clarksville, TN

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: January 6, 2011 — 8:01 PM
Air Age Media ©