Novak Velociti Light Brushless Motor Series

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FROM NOVAK:

THE VELOCITI SERIES IS GOING LIGHT

Irvine, CA – Oct. 3, 2007 — As a leader in sensored brushless motor design, Novak is doubling its Velociti motor series to complement any type of driving style. Novak’s new Velociti Light Brushless Motor series offers a different feel to Velociti by providing slower acceleration and softer braking power. The Light motors excel in challenging off-road and paved tracks, and offer exquisite control. There are five motors included in the Light series: Velociti Light 3.5L Brushless Motor (#3303), Velociti Light 4.5L Brushless Motor (#3304), Velociti Light 5.5L Brushless Motor (#3305), Velociti Light 6.5L Brushless Motor (#3306) and Velociti Light 7.5L Brushless Motor (#3307).

The Velociti Light series is very similar to the original Velociti series but is considered “light” because the wire used to wind the motor is a smaller gauge. Though this may seem like a small change, the ramifications are exciting. The smaller gauge allows for the same top speed, but with slower acceleration and softer braking power. It also makes the motors lighter­­–17 grams lighter than the Velociti Series to be exact. Because of these motor characteristics, the Velociti Light brushless motors excel in slippery and tight track conditions, and are ideal for off-road and specific on-road applications.

In addition to some new features, the Velociti Light Brushless Motors have also undergone a modification. The new Velociti Light motors have a blue, anodized sleeve around the motor instead of the Velociti motors’ traditional purple. In addition to the aesthetic appeal, the sleeves also help differentiate between the Velociti motors.

NICKEL-PLATED FOR A SILVER LINING

Just like the original Velociti motors, the Velociti Light motors are also equipped with the exclusively designed Nickel-plated Sintered Neodymium rotor. This high-performance rotor provides many of the same benefits, including increased magnetic strength, stronger motor braking power and maximum performance in higher temperature conditions. The 13MM Sintered Tuning Rotor is also compatible with the Velociti Light motors and can be purchased separately as an accessory item (#5909).

 

HIGH-VELOCITI STANDARDS

While the Velociti Light Series has qualities similar to the original Velociti Series, the differences, are noticeable behind the wheel. Like all Velociti motors, the Velociti Light motors are compatible with all models of the Novak’s GTB Racing Programmable Brushless/Brush ESC (#1710, #1711, #1714, and #1715). It has the same dimensions as all of the other Velociti motors, and sports the same lightweight aluminum ribbed end bells and flexible solder tab system.

The Velociti Light Brushless motors come equipped with all of the great standard Novak quality features you’ve come to expect, including an oversized front bearing for increased load handling and longer bearing life. All Novak Velociti motors are specifically designed for R/C vehicles, are sensor-based for excellent braking and low-speed driveability, and have no cogging, and provide longer run-times than brushed motors. The motors also come equipped with thermal overload protection (when used with a Novak brushless ESC) and a virtually maintenance-free design.

This Velociti Light Series offers drivers a wide range of optional power delivery choices, and all five of the Velociti Light Brushless Motors will be available at the end of October 2007.

VELOCITI LIGHT BRUSHLESS MOTOR RECOMMENDATIONS

·         Velociti Light 3.5L Racing Brushless Motor is 3.5 turns, and is ideal for top-level touring car racing on tight race tracks. Also ideal for Carpet Racing or open track 1/12^th scale racing. (#3303)

·         Velociti Light 4.5L Racing Brushless Motor is 4.5 turns, and is ideal for competition level 4WD racing, 1/12^th scale racing, or 5-cell 4WD off-road applications. (#3304)

·         Velociti Light 5.5L Racing Brushless Motor is 5.5 turns, and is ideal for Truck and 4WD racing, and 1/12^th scale “Club” Racing. (#3305)

·         Velociti Light 6.5L Racing Brushless Motor is 6.5 turns, and is ideal for Truck and 2WD Buggy racing and very tight 1/12^th scale tracks. (#3306)

·         Velociti Light 7.5L Racing Brushless Motor is 7.5 turns, and is ideal for loose or slippery track conditions when running 2WD. (#3307)

VELOCITI LIGHT BRUSHLESS MOTOR FEATURES

Ø       Provides excellent control in slippery off-road and tight on-road courses

Ø       High-performance, Nickel-plated Sintered Neodymium rotor (ROAR-Approved) for maximum motor acceleration, braking power, and performance in high-temperature conditions.

Ø       Sensor-based design for excellent braking and low-speed drivability

Ø       Lighter weight than Velociti Series motor

Ø       Oversized front bearing for increased load handling and bearing life

Ø       Lightweight, ribbed end bells, and blue-anodized sleeve

Ø       User-replaceable rotor (#5908), and user-replaceable front end bell/bearing, and rear bearing (#5919

Ø       Compatible with Novak 13MM Sintered Tuning Rotor (#5909) for further tuning options

Ø       Provides approximately 20% longer run-times compared to brushed motors

Ø       Direct-Solder Wiring Tabs for flexible soldering options

Ø       Virtually maintenance-free

Ø       Thermal Overload Protection (when used with Novak brushless ESC)

Ø       Low cogging

Ø       Designed, dyno-tested and factory hand-wound by Novak in Irvine, California

 

VELOCITI LIGHT BRUSHLESS MOTOR SPECIFICATIONS

Ø       Turns:……………………….. 3.5 (#3303)

                                             4.5 (#3304)

                                             5.5 (#3305)

                                             6.5 (#3306)

                                             7.5 (#3307)

Ø       Design:……………………… Sensor-based

Ø       Input Voltage:……………… 4-6 cells (1.2 volts/cell) or 2 cell Li-Po

Ø       Watts:………………………. 431 (#3303)

                                             413 (#3304)

                                             350 (#3305)

                                             315 (#3306)

                                             250 (#3307)

Ø       KV (unloaded)……………… 10,300 RPM/volt (#3303)

                                             8,200 RPM/volt (#3304)

                                             6,800 RPM/volt (#3305)

                                             5,900 RPM/volt (#3306)

                                             5,400 RPM/volt (#3307)

Ø       Motor Size: ………………… 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)

Ø       Motor Weight: …………….. 6.00 oz. (170 grams)

Ø       Shaft Diameter: ………….. 0.125” (3.2 mm) [accepts all existing pinion gears]

Ø       Bearing Size:………………. Oversized (1/2” x 3/16”) Front; Standard Rear (3/8” x 1/8”)

Ø       Protection:…………………. Thermal

Ø       Magnet:  …………………… Sintered Nickel-plated Neodymium (one-piece, multi-pole cylindrical high-strength)

 

For more hot products, click here.