MRC reveals GV2 2WD buggy prototype

RC Car Action - RC Cars & Trucks | MRC reveals GV2 2WD buggy prototype
 
 
 
 
 
 
 
From MRC:
 
 This is NOT the production car, so there might be some changes before it hits the market.
 
MRC/Team Academy “GV2 Pro” 2wd buggy.
Part# 15108
 
Features:
– Threaded shocks with bladders that can be flipped upside down for a more
  conventional emulsion type shock feel.
– No e-clips (captured hingepins)
– 27.5 kick-up with bellcrank matching the same angle
– Vertical ball studs on the front and rear bulkheads
– Rear axle will accept the ACADEMY hex rear rim, along with “MOST” other pin
  drive rims
– Front axle will accept the ACADEMY metric front bearing/rim, but…..
  there will be an additionaL ASE sized axle included so that Team Associated
  B4 front rims, and Proline B4 rims can be used as welL.
– Aluminum hingepin blocks have plastic balls that snap into them so that
  there is not excess force applied to the aluminum when changing
  antisquat / toe-in.
– Steel outdrives with Over Sized rings, that makes for a longer lasting diff
– Gear cover that is virtually air tight,  gear cover plug is tethered to the
  gear cover so that you dont lose it.
– Chunky CVA drives make the rear suspension bind free throughout
  suspension travel.
– Multi Length Pivot (MLP) on the hub carrier and arms both front and rear
  for long or short suspension geometry.
– Front bulkhead and shock tower are keyed and screwed together.
– Front hingepin block is keyed into both the upper bulkhead and also
  the lower bulkhead.
– Front Hingepin block has replaceable teflon sleeves.
– Rack or traditional style bellcrank is offered.
 
STREET PRICE OF AROUND $200.00!!!!!
 

For more news, click here.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 22, 2015 — 11:21 AM
Air Age Media ©