Hobbico Tactic TTX300 900x250
Log In

Search Results for – "RPM"


RPM’s Losi Baja Rey Front Bumper & Skid Plate

RPM’s Losi Baja Rey Front Bumper & Skid Plate

From RPM: When our engineers looked at the stock front bumper and skid plate on a Losi Baja Rey, they realized that the front skid plate was too stiff, preventing the bumper from absorbing impacts. Our solution involved more than just a simple skid plate redesign. We moved the entire skid plate from between the […]
RPM Green Traxxas X-Maxx A-Arms

RPM Green Traxxas X-Maxx A-Arms

From RPM: Immediately after Traxxas released the X-Maxx, RPM customers started notifying us that they needed stronger A-arms that could handle the weight and the punishment these massive trucks can dish out. We reviewed numerous photos of damage to stock A-arms to see where the weak points were, then reviewed a set of new A-arms […]

Ads after 2 posts

Traxxas GT 600x120

Ads after 6 posts

RPM Rear A-arms For The Associated B6 & B6D

RPM Rear A-arms For The Associated B6 & B6D

From RPM: RPM Rear A-arms for the Associated B6 & B6D are designed with the same principles as our Flat Front A-arms (RPM #81372) & Gull Wing Front A-arms (RPM #81422). With stock A-arms, the amount of slop at the hinge-pins can cause your suspension settings to wander (we found as much as 0.003” or […]
RPM Gull Wing Front A-Arms For The Associated B6 & B6D

RPM Gull Wing Front A-Arms For The Associated B6 & B6D

From RPM: The Associated B6 & B6D are race-bred machines ready to tear up the track. In order to win, you need: 1) A fast car with a killer set-up. 2) A vehicle that can handle the abuse you throw at it. 3) The ability to cross the finish line. RPM A-arms can help with […]

Ads after 2 posts

Ads after 6 posts

RPM Zoomies Mock Exhaust Headers

RPM Zoomies Mock Exhaust Headers

From RPM: What are “Zoomies”, you might be asking? It’s a term dating back to the 1970’s that describes 4 upturned exhaust pipes or headers on each side of the car. You may be most familiar with them from Nitro Funny Cars, Top Fuel and Monster Trucks although a few older folks might remember them […]
RPM Flat A-Arms For The Team Associated B6 & B6D

RPM Flat A-Arms For The Team Associated B6 & B6D

From RPM: You can’t go fast if your suspension settings don’t stay locked in. With stock A-arms, the amount of slop at the hinge-pins can cause your suspension settings to wander (we found as much as 0.003” or .076mm of clearance in the hinge pin holes of a stock set of new A-arms). Not with […]

Ads after 2 posts

Ads after 6 posts

Hobbico Tactic TTX300 600x120
RPM Front & Rear A-Arms For 1/10 ARRMA Vehicles

RPM Front & Rear A-Arms For 1/10 ARRMA Vehicles

From RPM: RPM is synonymous with strength and durability, plus we’re known for taking the extra steps to design unique parts worthy of your favorite ride. That’s why we’re releasing these front upper and lower A-arms for the ARRMA 1:10 scale line of vehicles. Our A-arms are stronger than stock and much beefier to help […]
RPM ESC Cage For The Castle Mamba X ESC

RPM ESC Cage For The Castle Mamba X ESC

From RPM: Our ESC Cage for the Castle Mamba X ESC provides a solid, positive mount to keep your new, and valuable ESC in place even under the most extreme circumstances. It also allows the ESC to be run with or without a fan. It encases the ESC body only, leaving the entire ESC fan […]

Ads after 2 posts

Ads after 6 posts

RPM Team Associated B6 & B6D Rear Bumper & Skid Plate

RPM Team Associated B6 & B6D Rear Bumper & Skid Plate

From RPM: All it takes is a single hit to the back of your race machine to realize the B6 / B6D has absolutely no rear end protection. Do you really want your competition (or the guy that has zero throttle control behind you) to have straight access to your rear shock tower / A-arms […]
RPM Front Bumpers For The Team Associated B6 & B6D

RPM Front Bumpers For The Team Associated B6 & B6D

From RPM: Everyone knows the Team Associated B6 & B6D is a racing machine but you can’t always hit the track to do your testing and, admit it, you know you like to drive it everywhere! When you’re off the track and want a bit more front-end protection than what the stock (or even the […]

Ads after 2 posts

Ads after 6 posts

RPM Rear A-Arms & Mud Guards For ARRMA Vehicles

RPM Rear A-Arms & Mud Guards For ARRMA Vehicles

From RPM: RPM Rear A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed for the ultimate in strength and durability while adding in some much-needed features. First is slop elimination. Our A-arms reduce the amount of movement of the A-arm at the hinge pins, providing for better suspension […]
RPM X-Maxx A-Arms Now Available In Blue

RPM X-Maxx A-Arms Now Available In Blue

From RPM: Immediately after Traxxas released the X-Maxx, RPM customers started notifying us that they needed stronger A-arms that could handle the weight and the punishment these massive trucks can dish out. We reviewed numerous photos of damage to stock A-arms to see where the weak points were, then reviewed a set of new A-arms […]
Airage Media © 2017
WordPress Video Lightbox Plugin